cpjitservices Posted November 14, 2013 Posted November 14, 2013 I am looking to install one, Ive dabbled a bit in alarms but this ones a bit different to what I have touched before. Im looking to get something Texecom based. At home in a tool box Ive got x2 Texecom Premier Grade 3 LCD Keypads. I can get hold of panels dirt cheap too (looking at a premier 24 on ebay). Debating whether to get a panel with built in keypad such as the Veritas range, or put these keypads up, get the control panel and buy the PIR's and the sounder box. The joys with the Premier I suppose is I can incorporate Fire alarm function within the system and have battery backup! (I believe anyway) What has everyone else got ? Anyone installed one of these Premier systems ? Cheers Chris.
twin--turbo Posted November 14, 2013 Posted November 14, 2013 I Installed a Texecom Veritas Excell in my old house, Looking at either another Excell or a Premier for this house. Don't go below an R8+ as they don't have a com port for programming. Note the Premier 24 is not a full 24 Zone unit but an 8 zone with Remote expanders. All units are battery backed as they have to be. Rob
twin--turbo Posted November 14, 2013 Posted November 14, 2013 (edited) Watch out on second hand panels, they may have the BOSS engineeer code or the NVRAM locked and these can make the pannel worthless. Veritas does support RKP's LCD or LED or both depending on model but will not support the Premier RKP's Given that you have the RKP's for a premier i would go with that & hide the system unit out of site. Rob Edited November 14, 2013 by twin--turbo
plexer Posted November 14, 2013 Posted November 14, 2013 Someone will be along in a minute saying stick a raspberry pi in with some sticky back plastic and a door sensor Ben
Jawloms Posted November 14, 2013 Posted November 14, 2013 I'd have thought this would be perfectly possible with a Raspberry pi, some sticky back plastic and a door sensor. 1
teejay Posted November 14, 2013 Posted November 14, 2013 Stick a Raspberry Pi in with some sticky back plastic and a door sensor:getmecoat: Added to that, you could get the camera module for it and do some cheap CCTV. 1
twin--turbo Posted November 14, 2013 Posted November 14, 2013 There are also 2 main premier versions "standard" and "elite" with different overall specifications. You can also get Proximity Tag RKP's Rob 1
Jawloms Posted November 14, 2013 Posted November 14, 2013 There are also 2 main premier versions "standard" and "elite" with different overall specifications. Do you mean the Raspberry Pi Model A and the Raspberry Pi Model B? 2
JJonas Posted November 14, 2013 Posted November 14, 2013 Do you mean the Raspberry Pi Model A and the Raspberry Pi Model B? No or 1
cpjitservices Posted November 14, 2013 Author Posted November 14, 2013 I have the Proximity Pad RKP's and ahve also just been told by the lad opposite me that he has a Premier 24 Control Panel in his garage that is still in box. He bought it for his business but never fitted it. I can have that so thats nice of him, hes got some Prox Readers too that I can have. All I need now is PIR's which are cheap enough and a sounder. Then figure out how im going to install it.......
cpjitservices Posted November 14, 2013 Author Posted November 14, 2013 I like the Ras Pi idea but dont have one!!
twin--turbo Posted November 14, 2013 Posted November 14, 2013 Google and you will find the manual. If you have pets then Tex do special PIR's you can also set double nock and all sorts. Been 10 years since I did the Excel but using the com programmer was easy peasy... Texe actualy sent the serial cable out to me for free!! I think I will be going the Premier route although the RKP's are a lot more expensive.. Rob
cpjitservices Posted November 15, 2013 Author Posted November 15, 2013 Actually the RKP's arnt that bad on ebay, you can reset them easy enough too. I do have pets and have been looking at the PETwise PIR's. Not sure how they work though ? Id set the alarm before I went to bed with the dog in the kitchen ?
AMLinington Posted November 15, 2013 Posted November 15, 2013 Is it really bad that this thread is making me itch to design a home security system via Rasp Pi linked up to a CCTV cam (I'm still sore about my stolen Hanging Basket)? 1
twin--turbo Posted November 15, 2013 Posted November 15, 2013 Yeah we had the petwise. I think they have built in double knock and can determine a large object over a smaler one.. But I realy can't remember. I would not realy trust a PI, it would cost more in the end too. Rob
pete Posted November 15, 2013 Posted November 15, 2013 Is it really bad that this thread is making me itch to design a home security system via Rasp Pi linked up to a CCTV cam (I'm still sore about my stolen Hanging Basket)? Raspberry Pi as low-cost HD surveillance camera - CodeProject Turn your Pi into a low-cost HD surveillance cam | Raspberry Pi 1
AMLinington Posted November 18, 2013 Posted November 18, 2013 Raspberry Pi as low-cost HD surveillance camera - CodeProject Turn your Pi into a low-cost HD surveillance cam | Raspberry Pi Awesome, thanks. I reckon this is a project for the new year!
Sirbendy Posted November 19, 2013 Posted November 19, 2013 I use a FOSCAM clone for this, heh. Actually, it's in the bunnyshed as Bunnycam at the mo. FTP's footage on motion detect to an internal NAS.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now