exim Posted September 25, 2013 Posted September 25, 2013 I'm thinking not likely, but any fixes for this? corrupt image with dodgy pixels all over the place as in photo attachments. Discontinued unit & warranty expired, and limited scope to replace (quickly anyway) due to bespoke boom arm.
Big-Ed Posted September 25, 2013 Posted September 25, 2013 Id look on ebay, normally a couple on there but they are pricy even when they are used.Man, that does look bad. If you get a second unit, you can open that one up & see if there are any loose cables etc.
TommyCooper Posted December 6, 2013 Posted December 6, 2013 Looks like you've got a faulty DMD chip so the only option would be to replace the projector. SMART's UF70 fits on the same fixings at the wall end (the 3 middle ones of the 5 fixings on the UF55) so swappong the boom arm should be fairly straightforward (as long as the UF55 was fitted in the correct position!)
exim Posted January 17, 2014 Author Posted January 17, 2014 I've now got a UF55 unit with image that's gone completely black and white - lost all colour. It's not the cables as the usual blue smart logo menu is now grey. Would this be the old irreparable chip situation?
TommyCooper Posted January 17, 2014 Posted January 17, 2014 I've now got a UF55 unit with image that's gone completely black and white - lost all colour. It's not the cables as the usual blue smart logo menu is now grey. Would this be the old irreparable chip situation? If everything's gone greyscale with no input it probably isn't the DMD chip. It could be a completely failed and stuck colour wheel, but more likely is that it's a failure on the main driver board. Both are technically repairable but might be costly if the unit's out of warranty.
Educare_AV Posted January 21, 2014 Posted January 21, 2014 I'm thinking not likely, but any fixes for this? corrupt image with dodgy pixels all over the place as in photo attachments. Discontinued unit & warranty expired, and limited scope to replace (quickly anyway) due to bespoke boom arm. We had one repaired with exactly the same fault a few week's back and it cost around £200 including courier fees.
Educare_AV Posted January 22, 2014 Posted January 22, 2014 TSC-UK Email address: [email protected] Phone: 01923 691865 Address: 42 Caxton Way Watford Business Park Watford, Hertforshire WD18 8QZ UK
Disease Posted January 22, 2014 Posted January 22, 2014 We had one of ours repaired there as well, £185 + vat. Good service.
LucCSMCN Posted May 7, 2014 Posted May 7, 2014 Does anyone considered to change the DMD Chip to repair the UF55?
Cablers_JonPaul Posted May 12, 2014 Posted May 12, 2014 Best thing you can do is ring TSC. 01923 691865 [email protected] They have fixed a few for schools we work with although they do not offer a DE-installation / RE-installation service so you will have to do that yourself or factor it into your costings. They can give you pricing for servicing and repairs. Alternatively send me a message and we can sort you out a quote for a replacement unit with an education warranty.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now