RM CC4 Build Error

[themanfromict]

I've been trying to rebuild one of the library computer since Monday, with multiple build errors.

 

Currently, when I attempt to build from either the network or WinPE it aborts before install OS with the error message:

Image handling exception: WIMGAPI function WIMCreateFile failed with error 1392 while processing E:\Images\d0p2.wim

 

Anyone experienced this error before and found a solution?

 

Thanks

 

Neil

[kai91]

have you tried re generating your build disk? Also have you performed a full restart of RM Service host?

[themanfromict]

Yes to both. Rebuilt another computer yesterday without any problems. Been all through the RM support pages but can't see any mention of error no. 1392.

[nickbro]

Try wiping the drive clean, i.e. using disk part to delete the partitions on the disk, then try rebuilding using PXE

[Admiral208]

faulty hard drive?

 

can you swap the drive and test again.

[themanfromict]

Just put in a new HDD that RM have sent out. Fails with the same error...

[themanfromict]

Just spoke to RM. Apparently anything with WIMGAPI is 99% of the time a RAM issue. Who knew!

[andyturpie]

We had this identical error message just last week on a workstation that wouldn't build and was as you say down to a faulty RAM stick. Apparently corrupts the OS .wim when pulling it down off the server... Edited September 20, 2013 by andyturpie

[howartp]

I don't normally reopen 4 year old threads, but having just come across this problem on a VMware virtual PC, I've decided I must have a faulty VIRTUAL stick of RAM then...!

[Techykev]

I have come across the WIMGAPI build error many times over the last 8-9 years and nine times out of ten it is the partitioning/formatting on the HDD. Once it was found to be a faulty RAM module and a couple of times it was faulty intermittent NIC/network issues. I think that a couple of occasions it was caused by the Server awaiting a reboot after updates too.