witch Posted July 24, 2013 Posted July 24, 2013 We have a new Promethean 378pro board which continually drops the sound - the on button changes from green to red randomly. The board AND the cable have been changed with no improvement. We have tried a laptop that is normally used with no issues on a different 378pro board of the same vintage and it doesn't work either. The teacher's laptop used normally with the failing board works fine with other boards. As I said, the board has been changed and the techs who did it did see that there is still an issue, but could suggest nothing other than maybe it was because we use VLC player - which we do all over the school without an issue. Can anyone offer ANY suggestions at all?
Steve21 Posted July 24, 2013 Posted July 24, 2013 Have you had a word with their official support team yet? There are a bunch of "official unofficial" patches to certain board firmwares that aren't released through normal updates etc. Had a few newer boards with issues that have been fixed through these. Steve
witch Posted July 24, 2013 Author Posted July 24, 2013 Have you had a word with their official support team yet? There are a bunch of "official unofficial" patches to certain board firmwares that aren't released through normal updates etc. Had a few newer boards with issues that have been fixed through these. Steve This all went through support and the only thing they can suggest is plugging in the board/laptop etc into an extension from another room to eliminate power issues. They have replaced the board so it has to be something in the room, doesn't it?
6Foot2 Posted July 24, 2013 Posted July 24, 2013 We have a new Promethean 378pro board which continually drops the sound - the on button changes from green to red randomly... When we saw this on our board we suspected enemy action [student interference] We have two of these boards and in September that number will be five. So far we have only been called out to address issues [regularly] in one room and only after break or lunch when students have been in the room unattended.
witch Posted July 24, 2013 Author Posted July 24, 2013 When we saw this on our board we suspected enemy action [student interference] We have two of these boards and in September that number will be five. So far we have only been called out to address issues [regularly] in one room and only after break or lunch when students have been in the room unattended. Afraid not. I saw it do it at least twice - the first time I managed to get it back to green and didnt even get out of the door before it had gone again
plexer Posted July 24, 2013 Posted July 24, 2013 Just because they replaced the board doesn't mean the new board isn't also faulty. Ben
witch Posted July 24, 2013 Author Posted July 24, 2013 Just because they replaced the board doesn't mean the new board isn't also faulty. Ben Well, yes, but seems unlikely. I have two others from the same "batch" as the first one and they are fine
plexer Posted July 24, 2013 Posted July 24, 2013 Move one of the other boards that works elsewhere in to the room? Ben
pete Posted July 24, 2013 Posted July 24, 2013 Swapped the external power brick for a known good one? Or if it's a "power brick optional" board, add one to see if that helps?
witch Posted July 24, 2013 Author Posted July 24, 2013 Everything pertaining to the board was changed with it, unfortunately Moving the board is a possibility but as I don't work holidays and am a lone, part-time, tech, it might be a bit difficult.
john Posted July 25, 2013 Posted July 25, 2013 If the board plugs into the mains ensure that it and the Laptop are plugged into the same mains socket and try that?
witch Posted July 26, 2013 Author Posted July 26, 2013 If the board plugs into the mains ensure that it and the Laptop are plugged into the same mains socket and try that? Promethean have suggested that we run an extension from another room to try that - currently the board and the laptop are plugged into the same mains socket
Jamman960 Posted July 26, 2013 Posted July 26, 2013 Very odd, have you been able to pin it down to an event? ie does it stay on until you attempt to play sound through it or just go off randomly? if its just random I wonder if it'd do the same with the laptop disconnected - assuming all power to the board isn't cut once you disconnect it, it might also be worth trying a phone or mp3 player via the 3.5mm input to see if that produces the same issue.
john Posted July 26, 2013 Posted July 26, 2013 Promethean have suggested that we run an extension from another room to try that - currently the board and the laptop are plugged into the same mains socket I would go with that, ensure it is a different ring to the one in that room (it is not uncommon for a few rooms to be on the same ring if its an old wiring setup V new ones where its often a ring a room)
witch Posted July 26, 2013 Author Posted July 26, 2013 Very odd, have you been able to pin it down to an event? ie does it stay on until you attempt to play sound through it or just go off randomly? if its just random I wonder if it'd do the same with the laptop disconnected - assuming all power to the board isn't cut once you disconnect it, it might also be worth trying a phone or mp3 player via the 3.5mm input to see if that produces the same issue. That is another thing promethean have asked us to do. I don't know if it stays on until you try and play sound through it because you don't need it until you do and the teacher tends not to turn it on! I would go with that, ensure it is a different ring to the one in that room (it is not uncommon for a few rooms to be on the same ring if its an old wiring setup V new ones where its often a ring a room) No clue as to how I would tell if it was on the same ring or not but I suspect it probably is one big ring for that part of the school as it is in the older bit (60's? 70's? - don't know)
john Posted July 26, 2013 Posted July 26, 2013 No clue as to how I would tell if it was on the same ring or not but I suspect it probably is one big ring for that part of the school as it is in the older bit (60's? 70's? - don't know) Turn / remove the fuses until you loose power in the socket it is in and then find a socket that works when that one is still off and voilla power from that socket
Norphy Posted July 26, 2013 Posted July 26, 2013 Probably a stupid question but how long is the USB lead that you've got connected to it? Is it longer than 5m? If so, it may be worth putting an active extender in there and seeing if that helps.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now