Hunter

will try today as we are having the same issues, will let you know

Yeah just normally staff leaving laptops in places instead of locking them back up

this made me giggle Our room is what we would all classify as a 'closet', no signs on the door just kept locked at all times. As above have mentioned thieves are more interested in ipads, laptops, digital cameras etc. Secure server room 'closet' is a happy server room.

'if in doubt, ask the boss'

Ours is set to auto lock after 5 Minutes, staff leaving machines unlocked is a pain for us especially when students are using the rooms. We do have 'Staff Quiet' work room where staff leave themselves logged into computers all the time. We have disabled multi users to try and get them to log themselves out, it is an up-hill battle.

I would suggest contacting the senior management before handing over any Data to do with schooling. I would not respond directly to the email myself but as others have responded above, place some figures on your school site. Most importantly go up the managerial chain to cover yourself and the school.

big bang

after a bit of google warrior'ing it seems it doesn't exist for techsoft at the moment

@AButters would that be for a techsoft? if so where can I get one? edit: you said conical I am an idiot

may be a long short but if permissions are ok and drives are mapped correct, could it be an issue with your install of power-point if you have a test rig could you try a new copy. Try test with a local administrator account too?

Go for a decent PSU which should last you a while and invest in a surge protector from socket to PC hopefully will save you next time

I see, if you are getting different results with cutting when using the same material, it can be either alignment issues, cleaning issues or focusing. With Air Assist it is used to clean the work area and protect the lens from dust. It is also a fire prevention method when cutting fabrics, but can remove smoke out of the lasers path for a better quality cut / engrave. I am not sure if air assist is available for laser cam machine at the moment sadly . I personally don't use Air Assist and find when I cut leather it is fine, I would really recommend checking the alignments are correct as a small bump can push it out. Let me know how you get on with the above settings for leather, Fingers crossed it will help .

When looking at the menu on the Laser cutter you have four options. If you go (System Setup) ----> (Position Setup) ----> (Auto Focus) this should help focusing the laser better for a more solid cut / Engrave. What program are you using on the computer that connects to the Laser Cutter?

all policies will be downloaded but if you want a certificate (for wireless) etc you will need to do a certutil -pulse.

Hi @papsychael when cutting leather on my schools LC A2+ printer I use the following settings, Cutting: power- 90 speed- 4 Engraving Light (only) Power- 80 / 85 Speed- 80 Also helps to double check auto level, but as @AButters said it does smell horrible but it seals it to rain which is a good thing. Edit: The settings also depend on what machine you have. The settings above are for the 30W version, if you have the 60W version you may benefit by bringing those above settings down. hope this helps, H

Still not working, client failing to register. Unsure why.

Newsccmlog.txtHi Steve Previous post was Nick, I have done as you suggested and have a log of what currently is going on. It seems to be working if not slowly. Will be heading down to D&T to cut out some students project now, will be back at 15:30. takecare H

Running this installs the client correctly, after the corrupt one is uninstalled ccmsetup.exe SMSSITECODE=CHS

our server is named Syscent-01, I have asked about the boundaries and I am assured that they are correct?

Hi guys have been poking around a little and have come up with this issue now, Couldn't find an MP source through AD. Error 0x80004005 ccmsetup 10/10/2017 16:24:34 20624 (0x5090) Current directory '\\ah-cj\admin$\ccmsetup' is not a valid source location. ccmsetup 10/10/2017 16:24:34 20624 (0x5090) No valid source or MP locations ccmsetup 10/10/2017 16:24:34 20624 (0x5090) [5.00.8540.1007] Params to send '5.0.8540.1006 Deployment "\\ah-cj\admin$\ccmsetup\ccmsetup.exe" ' ccmsetup 10/10/2017 16:24:34 20624 (0x5090) ccmsetup 10/10/2017 16:24:34 20624 (0x5090) Raised pending client deployment state message. ccmsetup 10/10/2017 16:24:34 20624 (0x5090) CcmSetup failed with error code 0x80004005 ccmsetup 10/10/2017 16:24:35 20624 (0x5090) issues with management point contacting active directory? and no valid management source?

right will check on the MP this evening inc checking the SSL cert for the auth, will let you guys know tomorrow Have a good evening, H

by manually specify do you mean try add a "fallback role" as we already have one in Servers and site system roles.

No luck as of yet Gents can try add a restart command in the task seq too see what happens?

Email has been sent Steve

an email would be smashing, I shall ask anyway but I think it would be best via an outlook message