JOrdan01070

Have a look at the Prusa I3

@witch try this page instead https://e3d-online.com/nozzles-for-3d-printer/v6-nozzles £5.40 per nozzle genuine e3d.

Hi @witch a cheap set of 0.4mm from amazon here or select another size. Offical e3d kit https://e3d-online.com/nozzle-pack-1-75mm-2

I am not sure why I just changed from domain users to domain admins as the primary group and it worked, it took me a while to resolve as every thing I found pointed to firewall blocking access to *.msappproxy.net:9090

I had this when i set up sso and i had to change the primary group of the user to domain admins i think to resolve it.

@witch no if you have ordered the original then no you will be fine.

@witch dont worry please see below Genuine e3d v6 E3d V6 and select bowden 1.75mm full kit 12v should be £56.40 E3d v6 clone E3d clone All metal throat for clone e3d Throat I have been using this PLA filament with great results Surreal PLA Can i get back to you on the bed leveling as i dont use one.

@witch not sure if you know about the face book group lots of info etc https://www.facebook.com/groups/1068531466501015/ With a bowden setup which the a2 has make sure the PTFE tube that goes from the extruder is ok, sometimes the PTFE tube can be the issue for under extrusion because of friction between the tube and the filament. Also make sure the hot end is correctly assembled as a gap from the nozzle to the threaded metal pipe can cause issues. Undo the nozzle slightly and turn the throat pip finger tight then heat the hot end up to 190 -200c then hold the heat block and tighten the nozzle to the throat pipe to remove any gap. A few different things to try. Jordan

This is the guide i used https://www.matterhackers.com/articles/how-to-calibrate-your-extruder

I would not do anything regarding firmware until he can print consistently. If you can wait till this evening then I can get more info for you to help get consistent prints, its taken me 5 weeks with small changes here and there to get good results. Jordan

Hi @witch you would have to change the firmware to support auto bed levelling. Changing the hot end to an e3d with an all metal heat break will allow you to print a range of filament as it can get to high temps, it can also help with the quality of the prints aswell. what problems is your husband having with the A2

Hi witch I have the a8, some ideas for you glass to go on the bed i have this one https://www.amazon.co.uk/gp/product/B00ICKHRBA/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1 mosfet (safety first for the heat bed)https://www.amazon.co.uk/gp/product/B06ZYQN6VQ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 e3d v6 hot end this is a clone https://www.amazon.co.uk/dp/B074NX68MP/_encoding=UTF8?coliid=I254GKMXBU55RP&colid=U565Q4APT93T purcahse the heat break direct from e3d for £11. frame upgrade AM8 3D Printer Extrusion Profile Metal Frame - Full Kit for Anet A8 upgrade (Natural) What problems is he having with the anet also what filament is he printing with.

I have an Anet A8 it is a kit printer and cost £110, prints better than the makerbot mini that i have at school. Once the printer is setup its fantastic check out https://www.facebook.com/groups/1068531466501015/ for more info.

I have a g1wc (not clone) hard wired it into the car 3 years ago fantastic bit of kit (£40 including hardwire kit), but head over to https://dashcamtalk.com/forum/ and have a look. When looking at video samples try and download proper footage not what has been uploaded to youtube there is a difference in the quality.

There are two ways. 1 Ask learnpad to add the app you want, this can take some time. 2 Do it your self. With the learnpads you unlock one setup google play and install the the app you want run the a learnpad app, which will allow you to upload the app to the learnpad site then you can push the app out to all the other learnpads. Hope that helps.

Have a look at learnpads it you can get the staff to use them properly they are great and you manage them through the learnpad website.

I have this problem on my machine and only when using chrome but every other browser works, and no other machines are affected going to have a look at the cookies and cache to see if that is the problem.

just done it

@Michael the quotes I had from Advanced learning included the support and from what I have seen you will only pay what Link2ict had quoted on the subscription charges for the next year. I have asked Advanced Learning if we can go direct as the school would save a fair amount, over Link2icts costs but was told we have to go through them for now.

Try this you will need to change the username, password and server. @echo OFF REM --- Check for an existing installation of Sophos AutoUpdate on 32-bit (the 'Sophos AutoUpdate Service' process) IF EXIST "C:\Program Files\Sophos\AutoUpdate\ALsvc.exe" goto _End REM --- Check for an existing installation of Sophos AutoUpdate on 64-bit (the 'Sophos AutoUpdate Service' process) IF EXIST "C:\Program Files (x86)\Sophos\AutoUpdate\ALSVC.exe" goto _End REM --- Check for an existing installation of Sophos Anti-Virus on 2003/XP (the SAV adapter config file) IF EXIST "C:\Documents and Settings\All Users\Application Data\Sophos\Remote Management System\3\Agent\AdapterStorage\SAV\SAVAdapterConfig" goto _End REM --- Check for an existing installation of Sophos Anti-Virus on Vista+ (the SAV adapter config file) IF EXIST "C:\ProgramData\Sophos\Remote Management System\3\Agent\AdapterStorage\SAV\SAVAdapterConfig" goto _End REM --- Deploy to Windows 2000/XP/2003/Vista/Windows7/2008/2008-R2 \\server\SophosUpdate\CIDs\S000\SAVSCFXP\Setup.exe -updp "\\server\SophosUpdate\CIDs\S000\SAVSCFXP" -user "username" -pwd "password" -mng yes REM --- End of the script :_End

Hi Valyn have a look at learnpads, they are very easy to use and manage.

PM'd you

You should have a display screen equipment workstation assessment done Display screen equipment (DSE) workstation checklist evry year or when something changes. All staff should have one done if they spend 1 hour or more per sitting at a computer. Hope this helps Jordan

Sums up a lot of today

Could I have 550 please