NDW Posted November 14, 2012 Posted November 14, 2012 (edited) Just found this video - For the smart Lightraise 60wi http://www.youtube.com/watch?v=oQplJav--0E it’s the first integrated dual touch interactive projector which you can use your finger or pen Edited November 14, 2012 by NDW spelling!! :(
pmdc199 Posted November 14, 2012 Posted November 14, 2012 Just found this video - For the smart Lightraise 60wi SMART LightRaise 60wi interactive projector - YouTube it’s the first integrated dual touch interactive projector which you can use your finger or pen Similar to epson 485wi but that does not have touch. We have lots of smart boards but have epson interactive projectors. What's the rule with smart notebook as we have site licences for them. I have heard that even with this you can't use notebook on a non smart interactive display?
exim Posted November 15, 2012 Posted November 15, 2012 correct, you need a special license per install
pmdc199 Posted November 15, 2012 Posted November 15, 2012 Did you get that from Smart as we were told differently when we enquired?
exim Posted November 15, 2012 Posted November 15, 2012 Did you get that from Smart as we were told differently when we enquired? Not smart direct, but several Smart partners that we've had to quote over the past few years, most recently last month.
bossman Posted November 15, 2012 Posted November 15, 2012 @NDW: Saw them down at Bett or something very similar and indeed it looked very good indeed except when we came to play with it and it seemed very sluggish in its use, they may well have updated the software and firmware so I could be at least 9 months out of touch. Also licensing is not cheap by all accounts.
NDW Posted November 15, 2012 Author Posted November 15, 2012 The new Smart Notebook 11 has an update which puts a watermark on all non-smart interactive products. To use any version of notebook on a non-smart interactive device the user must purchase a Collaborative License from smart direct or a reseller. If you continue to use the software on non-smart interactive products you are in breach of the user license agreement. A Smart notebook site license is limited to using smart notebook on smart products and no other 3rd party product. If you really need to use notebook - use this: http://express.smarttech.com It’s not ideal but it’s the only legal way to use notebook on a non-smart product without paying £500+ for a license per board
NDW Posted November 15, 2012 Author Posted November 15, 2012 This will be at BETT 2013 - the one last year was the 40wi, that used once pen only. the 60wi uses pen or finger + Dual touch (one of each or two fingers/ two pens)
exim Posted November 15, 2012 Posted November 15, 2012 @NDW: Saw them down at Bett or something very similar and indeed it looked very good indeed except when we came to play with it and it seemed very sluggish in its use, they may well have updated the software and firmware so I could be at least 9 months out of touch. Yeah, and that update is v11, and we all know what a piece of s*** that is. 1
Cache Posted November 15, 2012 Posted November 15, 2012 (edited) As it's a Smart projector, according to Steljes the Smart Notebook licence is included with it, so no extra licencing needed for it unless you want Maths Tools or anything like that. (That's the situation with the 40Wi anyway) A Smart Notebook licence is only needed if it's another brand of projector of interactive projector. (epson or whatever) Edited November 15, 2012 by Cache
NDW Posted November 16, 2012 Author Posted November 16, 2012 Yeah, and that update is v11, and we all know what a piece of s*** that is. +1 to that
pmdc199 Posted November 16, 2012 Posted November 16, 2012 As it's a Smart projector, according to Steljes the Smart Notebook licence is included with it, so no extra licencing needed for it unless you want Maths Tools or anything like that. (That's the situation with the 40Wi anyway) A Smart Notebook licence is only needed if it's another brand of projector of interactive projector. (epson or whatever) Same for 60Wi but quote from kpms is 2k for the 60Wi inc Vat (Have to pay vat here) 1700 without
SMMUK Posted November 20, 2012 Posted November 20, 2012 (edited) We had a trial kit 60Wi recently, but be aware the interactivity does not work if you use an extended desktop which we have, so that staff have to drag items to the projector display, this is to prevent them from displaying emails and MIS info to the class We would have liked to use them as a lot of staff use Smart notebook but dont necessarily want to have Smartboards or pay £500 per Smart licence in our new set up. We will be looking at the Epson interactive projector but are not sure if it will defintely work on extended desktop yet. Does anyone have any further info? Edited November 20, 2012 by SMMUK errors
NDW Posted November 20, 2012 Author Posted November 20, 2012 (edited) We had a trial kit 60Wi recently, but be aware the interactivity does not work if you use an extended desktop which we have, so that staff have to drag items to the projector display, this is to prevent them from displaying emails and MIS info to the class We would have liked to use them as a lot of staff use Smart notebook but dont necessarily want to have Smartboards or pay £500 per Smart licence in our new set up. We will be looking at the Epson interactive projector but are not sure if it will defintely work on extended desktop yet. Does anyone have any further info? Are you sure it wasn’t a 40wi that you had a trial of? The 60wi will be released in spring 2013. Also if you have the SMART interactive projector the software and licence is included. Unfortunately Epson won’t allow extended desktop use either Edited November 20, 2012 by NDW
gillop Posted August 20, 2013 Posted August 20, 2013 Just a heads up, I've just installed a 60Wi and have fallen foul of the maximum thickness of the bezel on the whiteboard we're projecting on, it can't be more than 3mm or the touch facility will not work. I'm in contact with Stejis to see if there is a work around as we'd ordered our boards seperately and Stejis have only so far found one supplier with a bezel under 3mm (TK Team), I'll post an update when I know more.
NDW Posted August 20, 2013 Author Posted August 20, 2013 If you buy the projector from steljes - they only recomment the TK-Team Boards. These are tried and tested by steljes themselves
Zourous Posted March 5, 2014 Posted March 5, 2014 Can anyone tell me, does the smart lightraise 60wi have a freeze option? We brought some benq touchscreens a while back, but much to the disappointment of teachers there wasn't a freeze option.
ozydave Posted March 6, 2014 Posted March 6, 2014 Yep does have a freeze function. No wonder no one found it. On the remote control you need to press the 'hide' button the wait a few seconds. Strange I know 1
Mr_K Posted March 6, 2014 Posted March 6, 2014 Can anyone tell me, does the smart lightraise 60wi have a freeze option? We brought some benq touchscreens a while back, but much to the disappointment of teachers there wasn't a freeze option. If you have tl650 screens there's a firmware upgrade to freeze. The new screens have freeze as well.
Zourous Posted March 6, 2014 Posted March 6, 2014 If you have tl650 screens there's a firmware upgrade to freeze. The new screens have freeze as well. Unfortunately we have TL550's & T650's and Benq have already confirmed they don't have a firmware release that enables a freeze option.
Zourous Posted October 30, 2014 Posted October 30, 2014 (edited) We've just had a Benq TL550 start to play up with the interaction again with a jumpy cursor. I was using a gold Belkin 2m USB and it has been working fine. Now I can't get it working consistently for love or money. Have even tried using a hdmi for the graphics (see previous posts) and this makes no difference either. Anyone else worked out a good solution yet? Edited October 30, 2014 by Zourous
OxfordBlue Posted October 31, 2014 Posted October 31, 2014 how did you get on with their recommendation? "Dear Sir, We understand that you had a problem using our Interactive Flat panel, precisely the model TL550, which have an USB cable moulded in to the back off the unit. Regarding your present problem, we want to advise you to use an active USB extended cable from Lindy to extend the built-in USB cable. You can find the product at this link: 5m USB 2.0 Slimline Active Extension Cable | LINDY UK The cable has been tested and worked flawlessly with BenQ Interactive Flat Panels. If you have a set up where you used faceplates, we strongly suggest you to contact your trusted installer. It is important to know the type, quality and length of the cable that runs between the two faceplates to avoid any possible loss of signal. We hope we have been able to provide you an acceptable and useful explanation, but we would like to invite you to contact our technical support if you need any more information or assistance. We will be more than happy to help you."
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now