thebrad Posted February 17, 2011 Posted February 17, 2011 Hi all, I got a problem with our printer I hope someone can help with. We have 3 Kyocera FS-5200DN printers at our school to allow staff to print colour. They are all working good but the problem is they are slow when the staff printer photos or large documents. One staff member this morning was printing a couple pages of photos and it took about 10 minutes to print! I looked in the queue on the server and the size going to the printer was about 500Mb. That's why it was taking so long. The printers are running the latest firmware, drivers and are connected via gigabit. Can anyone suggest how to fix this issue? Is there a way to reduce the size of data going to the printer? Any help would be much appreciated. Thanks, Brad.
mac_shinobi Posted February 17, 2011 Posted February 17, 2011 Normally driver settings on the print server both printing preferences and printing defaults ( generally under advanced tab ) and there could also be some settings on the printer itself but personally am not familiar with those printers - may be worth while a read of the manual to see what settings are on the printer.
NikChillin Posted February 17, 2011 Posted February 17, 2011 We had the same with an old Konika, it only had 64mb memory. Got a new one this year and it is fine.
elsiegee40 Posted February 17, 2011 Posted February 17, 2011 (edited) Is this printing photos directly, or is it printing large documents containing photos, or both? I would think that the problem is caused by a shortage of memory on the printers concerned. EDIT I've just been looking at reviews for this printer and they complain of "slow colour print speeds" so I think you're onto a loser with these huge photograph files. the printers simply aren't up to them. This poster I made for our school will help with the office documents:Compressing pictures.doc Edited February 17, 2011 by elsiegee40
Jon-Dukes Posted February 17, 2011 Posted February 17, 2011 In your printer properties on the Advanced tab is there a radio button selected that states "Start printing after last page is spooled"? If so, change this setting to "Start printing immediately" Let me know if this helps
Little-Miss Posted February 17, 2011 Posted February 17, 2011 Ah how funny. Welcome to my world. It was getting lonely! http://www.edugeek.net/forums/hardware/69757-printers-again-not-printing-large-image-files.html http://www.edugeek.net/forums/hardware/69724-anyone-using-kyocera-5300-2k3-xp-clients.html http://www.edugeek.net/forums/learning-network-manager/69077-network-printing.html
Michael Posted February 17, 2011 Posted February 17, 2011 To be honest I've had bad experiences using Kyocera printers/photocopiers. The drivers in general are poor and create a whole range of problems, occasionally crashing the spooler completely. I accept however that you need to try and fix the problem ASAP. The best way is to create a local port and point to a network printer this way, however this is time consuming. You also have no control of printer settings or driver upgrades centrally from your print server. Longterm however I would recommend you change the equipment. I have good experiences of Ricoh, Canon and Oce.
deano Posted February 17, 2011 Posted February 17, 2011 we had a similar issue with some Ricoh MFP's. we took out the "Enable advanced printing features" from the advanced options of the printer
Norphy Posted February 17, 2011 Posted February 17, 2011 We have the same printers here, we generally up the memory in them otherwise issues like this occur. I'd suggest looking into that.
thebrad Posted February 17, 2011 Author Posted February 17, 2011 Thanks for the replys guys. Yeah the printers only have 256mb of memory installed I might look at getting an extra module and trying it out. Does anyone know if I buy a memory module can I install them myself without voiding warranty?
Norphy Posted February 18, 2011 Posted February 18, 2011 Yes, the memory is a user upgradable part in those printers, your warranty will be fine as long as you get an official part.
Little-Miss Posted February 18, 2011 Posted February 18, 2011 Mine are leased so got told no! Grrr...
TechSupp Posted February 18, 2011 Posted February 18, 2011 Is this printing photos directly, or is it printing large documents containing photos, or both? I would think that the problem is caused by a shortage of memory on the printers concerned. EDIT I've just been looking at reviews for this printer and they complain of "slow colour print speeds" so I think you're onto a loser with these huge photograph files. the printers simply aren't up to them. This poster I made for our school will help with the office documents: Thats my thoughts exactly, had the same issue, its a case of training, dont print high resolution images that are only printed on plain paper and are only 3"x4". We now dont have the problem as we changed to a MFD, nice and quick although still annoys me they still insist on taking high res phots and expecting there to be space on he server to store then!...but thats another story.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now