6Foot2 Posted January 25, 2011 Posted January 25, 2011 This is a collection of PDFs detailing bolt sizes, washer sizes and other bits and pieces. Seems a bit dull but our Technology department will lap it up. Screenshot of part of one of the PDFs: http://gyazo.com/5c87a2d1c79f2ce2feb790f7e84ab757.png Links: Link 1: Fastener Type Chart Link 2: US and Metric Thread Sizes Link 3: Washer Sizes Link 4: Standard Metric Machine Screw Sizes Link 5: Standard Metric Hex Bolt Sizes and Thread Pitches Link 6: Standard US Machine Screw Sizes Link 7: Standard US Hex Bolt Sizes and Thread Pitches [Printing Instructions: To print these files, open in Adobe Reader and select print, then un-check all printer scaling options (such as Scale to fit). You can use the US ruler on the edge or bottom of each document to check to make sure they are printed to scale.] Source: Bolt Depot - Nuts and Bolts, Screws and Fasteners online 2
Andrew_C Posted January 25, 2011 Posted January 25, 2011 And the heads you might find on them! I've seen more comprehensive charts, but can't find them at the moment! (Rats - rather small. I'll try again, but aH&S meeting {yawn} calls)
localzuk Posted January 25, 2011 Posted January 25, 2011 And the heads you might find on them! [ATTACH=CONFIG]9234[/ATTACH] I've seen more comprehensive charts, but can't find them at the moment! (Rats - rather small. I'll try again, but aH&S meeting {yawn} calls) A tad small!
webman Posted January 25, 2011 Posted January 25, 2011 (Rats - rather small. I'll try again, but aH&S meeting {yawn} calls) Don't go... Make a bolt for the main exit!
K.C.Leblanc Posted January 25, 2011 Posted January 25, 2011 All this talk of industrial fastenings, it's riveting.
JJonas Posted January 25, 2011 Posted January 25, 2011 All this talk of industrial fastenings, it's riveting. its driving me nuts...
CESIL Posted January 25, 2011 Posted January 25, 2011 Just don't try searching online for "machine screws"...you will get some very dodgy results
Andrew_C Posted January 25, 2011 Posted January 25, 2011 I can't find the poster that I've seen before, but WIKI have a good page on them.
6Foot2 Posted January 25, 2011 Author Posted January 25, 2011 I can't find the poster that I've seen before, but WIKI have a good page on them. I think I may have found what you are thinking of: http://www.bontool.com/knowledge_center/Support_files/KC_%20Misc/Screw_Drive_Styles.jpg Also: http://www.disassociated.com/images/posts/screwheads.jpg
Andrew_C Posted January 25, 2011 Posted January 25, 2011 Similar, but there were many, many, more types! Also who made them, when, and what they are used on. Still, the Wiki article is quite good for that.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now