Kyocera FS-C5200DN - anyone using them ?

[mattx]

Kyocera FS-C5200DN - anyone using them - comments / suggestions please......Thanks.

[carnforthhigh]

We use the Utax CLP 3621 which if i am right are the same machine as these. Very reliable and good quality printing, long toner life too.

[Roopert]

using the 5100 version in one of my schools and apart from some hardware issues when it arrived. (which were resolved reasonably by kyocera - i.e. replaced!) its print quality is fine and there have been no issues so far.

[mattx]

--> Bump <--

[button_ripple]

We are using the FS-5300DN, no problems at all. Prints are ok, and the running costs are very low. Can take a while to print out photos (especially if they are printed from Windows 7 for some reason).

[mounters]

We use the 5300 as well, no problems with them, cheap to run as well.

 

@button_ripple look at the driver you are using, i've found that using the latest kx driver is better than the basic windows 7 version. Last time I looked it was unsigned though so depending how you deploy printers you may need to make some changes to policies, etc.

[Fruity]

We’re using a couple of 5025's and their Utax clones and all work very well.

 

On the odd occasion we've had to contact Kyocera support, it’s been a painless experience and the issues resolved without any hassle.