tri_94 Posted March 25, 2010 Posted March 25, 2010 hi there can anyone direct me to the PXE driver for the Atheros AR8131? As we have RM network and trying to deploy using PXE which normal works fine. however on my new computers i get a "PCI\VEN_1969%DEV_1063&Subsys_E10001458&REV_C0" missing driver Motherboard is a Gigabyte - GA-G31M-ESL and as far as i can tell its the Atheros AR8131, i've tried the Standard Vista driver but dont seem to have any luck. any ideas thanks nick
Andy_SJF Posted April 14, 2010 Posted April 14, 2010 Hi ive too got the same problem, our school has just purchased 25 machines with this network adapter and now the supplier wont help us. As we also have an RM Network ive spoken to our LEA and they say the Atheros AR8131 adapter is an unsupported model for RM CC3 Networks. I found this site with "Dos Drivers" but so far have been unsuccessful Atheros Communications If you have more luck please let me know. Andy
tri_94 Posted April 19, 2010 Author Posted April 19, 2010 hi there right it is possible and im sure i managed to get it to work from one of the drivers off my motherboard CD just not sure which one i used now. but it will work and they will seemlessly build onto the network. if you give it another try and if you still have problems let me know and i'll see if i can workout which driver i used... thanks nick
Andy_SJF Posted April 22, 2010 Posted April 22, 2010 Hi Right im still having a problem with the Atheros AR81x dos drivers so far i have tried then following drivers: L1 NDIS L2 NDIS NDis2 v2.0.1.0 NDIS2 v1.0.0.19 ATL1c Dos Drivers from the Gigabyte Driver Disc When i am building the machines from disk i keep getting the following error: NIC Not found! Net0109 UNLOADABLE TCP 1.0 not loaded Link Status 100MBPS Full Duplex Thanks Andy
tri_94 Posted April 22, 2010 Author Posted April 22, 2010 are you using CC3 or CC4 and have you tried building from WDS?
Andy_SJF Posted April 23, 2010 Posted April 23, 2010 Hi We are currently using CC3, I have not tried WDS, i take it this is how you got your computers to build?
tri_94 Posted April 23, 2010 Author Posted April 23, 2010 Hi We are currently using CC3, I have not tried WDS, i take it this is how you got your computers to build? hi there, yeah we are on CC4 and i use WDS to install.
IrritableTech Posted April 23, 2010 Posted April 23, 2010 If you lot are still after the dos drivers... I downloaded them a few weeks ago. Can't remember where from but they worked for my pxe boot image. AttachedAR813x_AR815x.zip 5
Andy_SJF Posted April 23, 2010 Posted April 23, 2010 (edited) Tri_94 Yeah i think thats an issue we will have because of CC3, the drivers are not available from RM maybe when the school decides to upgrade to CC4 or a vanilla network terrorvis Thanks i will give them ago sometime next week, anything is greatly appreciated Edited April 23, 2010 by Andy_SJF
chipa Posted April 27, 2010 Posted April 27, 2010 Plenty of googling and I find this page. Thanks for the file terrovis! It worked perfectly.
whanos Posted May 12, 2010 Posted May 12, 2010 If you lot are still after the dos drivers... I downloaded them a few weeks ago. Can't remember where from but they worked for my pxe boot image. Attached Bloody Legend!!! Has taken me days to find this link!!!
GAMe Posted June 11, 2010 Posted June 11, 2010 Hi all, did you peeps manage to get this to fully complete a build on an RM network? I am currently posting on this thread http://www.edugeek.net/forums/network-classroom-management/12933-connecting-non-rm-laptops-cc3-network-2.html#post524097 Im struggling to get the build to complete past windows due to windows drivers (Atheros AR8131). any help would be great if anyone has had issues with this Thanks
ssiruuk2 Posted August 11, 2010 Posted August 11, 2010 Sorry for digging up an old thread, but just wanted to say a huge thanks to Terrorvis for uploading that NDIS driver. I have 60 new machines stacked up with this Atheros chipset that I couldn't Ghostcast until I saw this thread. Have spent hours scouring various sites trying to find one that would work.. Thanks again - really has got me out of a hole!
jtiemanfosd Posted September 13, 2010 Posted September 13, 2010 Thanks to Terrorvis you have just ended a 3 week fight with this driver.
tirekicker Posted April 8, 2011 Posted April 8, 2011 If I knew where terrorvis was at right now, Id buy him a beer for posting that driver up. Saved my ass.
ralpo Posted May 9, 2011 Posted May 9, 2011 Terrovis solved my problems!!! Thanks. Tried to get it working for a day and with this driver my Ghost issues are gone
sunw101 Posted December 9, 2011 Posted December 9, 2011 Thanks Terrovis this drive is a big help and was has been hard to find.
nolimit Posted December 14, 2011 Posted December 14, 2011 (edited) hi im having the same issue where am i using this driver for , where is this driver going where would i copy these files to. thank you Edited December 14, 2011 by nolimit more information added
nolimit Posted December 14, 2011 Posted December 14, 2011 hi im having the same issue where am i using this driver for , where would i be copying these files to please help . thank s
JTeaney Posted February 6, 2013 Posted February 6, 2013 If you lot are still after the dos drivers... I downloaded them a few weeks ago. Can't remember where from but they worked for my pxe boot image. Attached You just saved my back side! The official site has a corrupted .inf in the download package.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now