Jump to content

Recommended Posts

Posted

Okay people,a couple of days ago I noticed my boot lid's electronic release wouldn't work but I thought it was maybe frozen. Then yesterday I discovered my washer pump wasn't working. This all turned out to be because of the 10A mini blade fuse that had blown which is the fuse for both systems. So in my haste to replace it I rush off and find out I've left the fuse in the office at work. Never mind, I pull another one out as I think nothing could really go wrong...wait for it....wait....FAIL!!!

 

Yes as the title may have clued you in I've pulled out the central locking fuse. I figured let's just put it back in and away we go....nope. So now I need to know how to reset the central locking system. Any ideas? Anybody stupidly done something similar?

 

One guy on another site said he had the exact same problem and solved it by disconnecting the battery, leaving it 30 minutes, reconnected it and everything was sorted. BUT I'm not sure about doing this as probably quite understandably I don't wish to make things any worse...not that being unable to lock any door except the drivers door isn't bad enough.

 

 

Please help me :Cry::Cry::Cry:

Darren

Posted
Put the key in the ignition, turn it to the point just before you start the car (slot 2) and then press a lock/unlock button on the key. This will reprogram your central locking.
  • Thanks 1
Posted

It didn't work. Darn it. Is that procedure for resetting the key fob or the car? With pulling the fuse out (don't worry I put it back in) I don't know whether the car itself needs doing. I think I may have to disconnect the battery and then reconnect after a bit.

 

:Cry::Cry::Cry::Cry::Cry:

Posted
It didn't work. Darn it. Is that procedure for resetting the key fob or the car? With pulling the fuse out (don't worry I put it back in) I don't know whether the car itself needs doing. I think I may have to disconnect the battery and then reconnect after a bit.

 

:Cry::Cry::Cry::Cry::Cry:

 

Ah - sorry. I had to replace the battery in my fob and that's what did the trick. Not sure when you've pulled the fuse, but I have read (as I was looking a couple of weeks ago for my situation) that pulling the battery for half an hour seemed to do the trick.

  • Thanks 1
Posted
I have read (as I was looking a couple of weeks ago for my situation) that pulling the battery for half an hour seemed to do the trick.

 

I would quite happily do this if I knew it wasn't going to cause any more problems than I already have. Will post back tomorrow with results.

Posted
I have no useful input, but I got confused when I saw an identical thread on another forum I'm on (BCF).

 

Yeah that was me (DAZZD) too. Bikes are way better than cars, they don't have central locking. Lol.

 

Anyway people, problem solved. Disconnecting the battery for half an hour did the trick. So thanks to all for suggestions and many thanks to Hightower for confirming the same thing I'd read. :D

Posted
many thanks to Hightower for confirming the same thing I'd read. :D

 

I hadn't tried it, just something I stumbled on weeks ago when looking for a solution to my problem. Good to know it works though in case I ever have similar troubles.

  • 11 months later...
Posted
Hi, had exactly the same issue, water pump stopped and couldnt open the boot, found fuse 8 had blown, used the fuse in number 7 which is a 20amp to check, boot opened and washer started, put the fuse back in and the central locking wasnt working, disconnected the battery as per above, reconneced 10 minutes later which reset the central locking. hard to under stand why they would put the boot and the washer on the same fuse. Worked for me. Adrian
Posted
Hi, had exactly the same issue, water pump stopped and couldnt open the boot, found fuse 8 had blown, used the fuse in number 7 which is a 20amp to check, boot opened and washer started, put the fuse back in and the central locking wasnt working, disconnected the battery as per above, reconneced 10 minutes later which reset the central locking. hard to under stand why they would put the boot and the washer on the same fuse. Worked for me. Adrian

 

probably sue the same multiplex wiring to get into the boot itself so less wires need to go out of the cars main chassis making it simpler to assemble

Posted
im pretty sure the air con, headlights and central locking are all on the same fuse, so check they still work after you pulled the fuse :) Astras blow the Window washer fuse for fun, just make sure you carry a few spares around and you will be fine.
Posted
A quick tip: If you disconnect the battery and then touch the positive and negative cables together, this will discharge any capacitors and soft reset the ECU's of the car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...