Number6 Posted May 6, 2009 Posted May 6, 2009 I'm also x-posting this onto the W7 forum. I upgraded my laptop to W7 RC1. Absolutely everything is fine, all settings, programs, documents, etc were migrated over by the superb W7 upgrade tool. No issues at all. SIMS loaded and ran fine, browsing the focus pages is AOK. On clicking the System link however the following error presented: “The procedure entry point I_NetNameCanonicalize could not be located in the dynamic link library NETAPI32.dll” I thought this might simply be a migration issue so I completely uninstalled SIMS and re-installed but the same error presented. Has anyone else come across this. Is there a fix?
powdarrmonkey Posted May 6, 2009 Posted May 6, 2009 SIMS loaded and ran fine, browsing the focus pages is AOK. On clicking the System link however the following error presented: “The procedure entry point I_NetNameCanonicalize could not be located in the dynamic link library NETAPI32.dll” Netapi32.dll is part of the .Net library. Check you have all the .Net runtimes installed (1.1, 2, 3, 3.5 and 3.5SP2) and then blame SIMS.
farmerste Posted May 6, 2009 Posted May 6, 2009 sims on windows 7, i wouldn't even dare, sims still doesn't work correctly with xp sp3, or office 2007, my admin system is still on xpsp2, not sure about IE8 ? Thats the message from 'our' tech support anyway
Number6 Posted May 6, 2009 Author Posted May 6, 2009 sims on windows 7, i wouldn't even dare, sims still doesn't work correctly with xp sp3, or office 2007, my admin system is still on xpsp2, not sure about IE8 ? Thats the message from 'our' tech support anyway Nah! Had no problem with it running on Vista, even on SP2 beta. It's going to have to run on W7 at some point and this is a test run, as is W7 itself on this machine.
Number6 Posted May 6, 2009 Author Posted May 6, 2009 Well, netapi32.dll is present. Passed it on to Capita support.
powdarrmonkey Posted May 6, 2009 Posted May 6, 2009 Well, netapi32.dll is present. Passed it on to Capita support. Doesn't mean that symbol is in the version on your disk.
localzuk Posted May 6, 2009 Posted May 6, 2009 Well, netapi32.dll is present. Passed it on to Capita support. Are you using 64bit or 32bit Windows 7? Also, I doubt Capita support will do anything, as it isn't supported!
Number6 Posted May 6, 2009 Author Posted May 6, 2009 Doesn't mean that symbol is in the version on your disk. Quite. Understood but I've run .Net 3.5
Number6 Posted May 6, 2009 Author Posted May 6, 2009 Are you using 64bit or 32bit Windows 7? Also, I doubt Capita support will do anything, as it isn't supported! 32 Bit
powdarrmonkey Posted May 6, 2009 Posted May 6, 2009 They're not truly backwards-compatible, and I don't know which version SIMS requires.
Mcshammer_dj Posted May 6, 2009 Posted May 6, 2009 you need to make sure that you have .net version 2 on the system and registered
Kitkatninja Posted May 6, 2009 Posted May 6, 2009 Have you considered trying sims.net in XP Mode? Beat me to that question -Ken
Number6 Posted May 6, 2009 Author Posted May 6, 2009 Have you considered trying sims.net in XP Mode? NO. But I have now Thanks
Number6 Posted May 6, 2009 Author Posted May 6, 2009 Just heard back from Capita. They will be supporting W7 within 6 months from official release. So, not too bad really, we can certainly live with that.
Jeremy69 Posted May 6, 2009 Posted May 6, 2009 my admin system is still on xpsp2, not sure about IE8 ? Thats the message from 'our' tech support anyway We've run IE8 on a couple of machines since release and no issues at all detected with SIMS.
DrPerceptron Posted May 6, 2009 Posted May 6, 2009 Did it work within XP Mode? I tried, but I couldn't get it to install, I suspect I need the administrator password, but I'm not sure what it is...
Number6 Posted May 6, 2009 Author Posted May 6, 2009 Did it work within XP Mode? I tried, but I couldn't get it to install, I suspect I need the administrator password, but I'm not sure what it is... It wouldn't run I had no free time to mess around with it, if I need to use the system console, which is rarely, I'll just borrow someone elses PC It's not needed often and the main part of SIMS runs perfectly fine under W7.
AyatollahPies Posted May 7, 2009 Posted May 7, 2009 Have you considered trying sims.net in XP Mode? I'm beginning to think this XP mode is going to be a huge backwards step. If it costs a company far less money to tweak their software so it works in XP Mode rather than make it fully compatible with Windows 7, then that it was they will do.
MartinT Posted May 8, 2009 Posted May 8, 2009 sims still doesn't work correctly with xp sp3, or office 2007, my admin system is still on xpsp2, not sure about IE8 ? We have no problems here with XP SP3 running Office 2007 and IE8. What do you mean by 'still doesn't work correctly'?
farmerste Posted May 8, 2009 Posted May 8, 2009 i was told with sp3, and off 2007, spreadsheets and the like would not open up correctly from within sims. also i was told the same occurs with off 2003, and sp3. 'Our' tech support has reported issues, and i only asked them a couple of weeks ago, and the reply was 'not yet'. So i'll wait
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now