Jump to content

Recommended Posts

Posted

Been going through some older machines to see what I can make out of them.

I've got one and no matter what Hard Disk I put in it it gets as far as Inspecting Hardware Configuration when installing XP then goes to a black screen.

I've tried fdisk /mbr and a full fdisk but still the same

Any ideas?

Posted

Yeah they meet minimum spec for XP, got 512mb Ram. Semperon processor.

 

The motherboard is PCChips M848A Rev 2.1.

Guess it needs a bios update but can only find the Rev5 on their site so don't want to mess it up with that.

Posted (edited)
moterboard change would be your best bet as pc chips are rubbish

 

Ahh you've got to love the sweeping statements.

 

PC Chips can be ok, it depends what chipset they use. Back in the days of the mighty K6-2, my via based Gigabyte motherboard was not altogether that good, USB was really unstable. My friend had the same system except that he had a PC Chips board with an SiS chipset and that was much better.

 

So there :D:p

 

In response to the original poster, I'd probably do a zero fill on the hard disk and run a memory test for starters. I'd also check the board (and power supply) for blown caps, they can cause all sorts of weirdness.

 

Also, go into your BIOS, there may be an option, probably under plug and play or something, to "Reset Configuration Data". Select "Enable". Probably won't make any difference for XP but it has fixed similar problems for me in the past.

Edited by Batman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...