ousecruz Posted March 12, 2009 Posted March 12, 2009 A Windows XP Pro system will display the Windows logo and then then the screen goes black and nothing else displays. Another monitor was tried and the same results. No new hardware or software was added to the system. A system restore, last known good configuration were done and the same issue happens. The computer will boot into safe mode and display. Any assistance offered would be greatly appreciated. Start Free Trial
powdarrmonkey Posted March 12, 2009 Posted March 12, 2009 Once upon a time, in a land far far away... Oh, sorry. It smells like a display driver; re-install the driver manually and disable acceleration features.
SYNACK Posted March 12, 2009 Posted March 12, 2009 Boot into VGA mode or safe mode by holding down F8 when the computer boots before you get to the Windows XP / Vista loading screen and picking it from the list. If it works then it is the driver, reset the resolution in VGA mode to something lower 800/600 then reboot and see if that works.
powdarrmonkey Posted March 12, 2009 Posted March 12, 2009 --8<-- The computer will boot into safe mode and display. -->8--
Michael Posted March 12, 2009 Posted March 12, 2009 Synack uses a similar technique to what I use - Press F8, boot into VGA Mode, navigate to Device Manager and expand Display adapters. In turn highlight each display adapter, then press the delete key, then reboot. Windows will then detect it as new hardware and re-install drivers automatically. Just tweak the resolution as appropriate as it'll be a nice 800 x 600
ousecruz Posted March 13, 2009 Author Posted March 13, 2009 (edited) Tried to boot it up in vga mode - comes up with black screen after windows logo Remoted controlled via Dameware same problem Logged on in safemode and changed the display setting but these won't save Have deleted the display adapters as suggested and now have a blue screen after windows logo Will try a bios upgrade next but would be grateful for any other suggestions Edited March 13, 2009 by ousecruz
powdarrmonkey Posted March 13, 2009 Posted March 13, 2009 (edited) Have deleted the display adapters as suggested No, open the display adapter properties and replace the driver with a fresh one - preferably an updated driver from the manufacturer. . Edited March 13, 2009 by powdarrmonkey speeling
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now