nawbus Posted January 12, 2009 Posted January 12, 2009 Our performing arts teacher has managed to snap off the headphone jack plug inside his MacBook. Despite trying superglue and matchsticks and tweezers we can't get it out. The socket is a sealed unit on the motherboard so that's a none starter as well. Does anyone know if there is a way to disable the socket through OSX? Ta
MkII Posted January 12, 2009 Posted January 12, 2009 Is is possible to drill it with a very fine drill? Maybe work up in sizes, and if the drill doesn't pull it out, screw something into the hole? /Just an idea
HodgeHi Posted January 12, 2009 Posted January 12, 2009 system preferences > sound > Output. Just change it to Internal Speakers. 1
OutToLunch Posted January 12, 2009 Posted January 12, 2009 Might not do it much good but if it's broken anyway - how about the tip of an old screwdriver and a bit of glue intended for metal rather than superglue? Leave it balanced in place while setting etc.
Daleus Posted January 12, 2009 Posted January 12, 2009 Yeah theres an app called "SoundSource" that lets you pick where the audio plays. 1
dave20046 Posted January 12, 2009 Posted January 12, 2009 Can't you open up macbooks? If it's any normal laptop I've opened them up and soldered a new jack on before...or if it's in warranty blag the manufacturer.
nawbus Posted January 12, 2009 Author Posted January 12, 2009 system preferences > sound > Output. Just change it to Internal Speakers. I'd looked at that, but the only option is for digital out. No internal speakers! Yeah theres an app called "SoundSource" that lets you pick where the audio plays. That gives me the same as the system prefs!
nawbus Posted January 12, 2009 Author Posted January 12, 2009 Can't you open up macbooks? If it's any normal laptop I've opened them up and soldered a new jack on before...or if it's in warranty blag the manufacturer. It's well out of warranty! We did take the 'lid' off, but I'm not too sure if my soldering skills are quite up to the job! I'm not too bothered if the plug stays in place, just as long as we can get some noise out of it!
Brpilot99 Posted January 12, 2009 Posted January 12, 2009 I had the same problem on a PC laptop and ended up purchasing a cheap USB sound device .... I then plugged the speakers into it and Voila .... got my sounds back ... Don't know much about Macs but assume USB is universal ... Cheers Brain
dave20046 Posted January 12, 2009 Posted January 12, 2009 I had the same problem on a PC laptop and ended up purchasing a cheap USB sound device .... I then plugged the speakers into it and Voila .... got my sounds back ... Don't know much about Macs but assume USB is universal ... Cheers Brain Probably going to be your best bet then!
nawbus Posted January 12, 2009 Author Posted January 12, 2009 I had the same problem on a PC laptop and ended up purchasing a cheap USB sound device .... I then plugged the speakers into it and Voila .... got my sounds back ... Don't know much about Macs but assume USB is universal ... Cheers Brain That one had crossed my mind, but obviously we want to try the least cost option first!!!
webman Posted January 12, 2009 Posted January 12, 2009 Bit of blutac on the end of a small screwdriver to pull it out?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now