Warwick_Tech Posted May 9, 2022 Posted May 9, 2022 (edited) found in a circa 2005 TFL Environ 400 Bus by the CCTV module Edited May 9, 2022 by Warwick_Tech
Michael Posted May 9, 2022 Posted May 9, 2022 Pass - some kind of network adapter or modem for a CCTV unit?
3s-gtech Posted May 9, 2022 Posted May 9, 2022 It's a very simple circuit - a relay and those two jacks with what looks like a multi-voltage power input. Possibly a converter for powering the cameras over different cable types?
Michael Posted May 9, 2022 Posted May 9, 2022 It's a very simple circuit - a relay and those two jacks with what looks like a multi-voltage power input. Possibly a converter for powering the cameras over different cable types? Maybe - the LAN port for viewing/recording locally and the modem for monitoring remotely? It looks like it has its own housing though, rather than just a PCI card to upgrade an existing system. Do we get a prize if we get it right?
Aprice Posted May 9, 2022 Posted May 9, 2022 Yeah, some sort of Power distribution, it's got a 5V voltage regulator on. It looks like some sort of microcontroller board can plug in next to the relay.
localzuk Posted May 9, 2022 Posted May 9, 2022 (edited) Sold by a lighting wholesaler. Some form of primitive light control device? Eg. Hooks up to some sort of primitive building management system to control lighting? EDIT: Oh, missed the bus bit. Switch for turning the cameras on to not drain the battery? Edited May 9, 2022 by localzuk
Andrew_C Posted May 9, 2022 Posted May 9, 2022 IF there is something under the board to decode traffic, I'd guess and IP controlled relay. EDIT - misread the bit about being on a bus. I had missed the 4wheeled context. Switch for something.
Chris_Cook Posted May 9, 2022 Posted May 9, 2022 It's probably a relay to turn the CCTV off when the bus isn't running, or the battery voltage drops below a certain point. It's not ethernet as the RJ connectors don't have enough pins, and the unpopulated 8 pin RJ socket pads are wired wrong. I'm guessing there is a PIC micro-controller underneath (or something similar), or one can plug into the RTC pins. There are some pads for ICD which are likely "In-circuit Debug" (essentially a serial port). The L7805 and the diode next to it would take a higher voltage supply (between 6v and 30v ish) and generate a 5v supply. 5v isn't used much for CCTV, so that's likely to power an MCU on the underside.
Warwick_Tech Posted May 9, 2022 Author Posted May 9, 2022 Thanks for the replies all - No prize I'm afraid as I have no idea either! but if you want to see where it came from.... It's the only part TFL left behind
3s-gtech Posted May 9, 2022 Posted May 9, 2022 The other end of that cable with the RJ11(?) on it may give the answer! Certainly looks like a remote power control.
localzuk Posted May 9, 2022 Posted May 9, 2022 Where do the network and phone wires go? Might give you a clue at the other end?
Andrew_C Posted May 9, 2022 Posted May 9, 2022 Where do the network and phone wires go? Might give you a clue at the other end? Network? Phone? I'M ON A BUS!! Yes, I know some now offer WiFi.
Jawloms Posted May 9, 2022 Posted May 9, 2022 I reckon it'll give you covid if you're not wearing your foil hat.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now