Jump to content

Recommended Posts

Posted

Hi all,

 

So our Trust is opening a brand new school in Sep 2020... how would you go about the network set up? The most minimal yet functional set up possible? I'm thinking def. cloud based, but what about on site stuff?

Posted
A lot of our schools have suffered from bodging up over the years .. plus most have a dual system with network drives, Google Drive etc. We want a simple system to start with which isn't a replica of the current bodge jobs!
  • Thanks 1
Posted

Depending on available ££'s obviously - but ....

 

 

  • 10G fibre backbone to the edge/core cabs.
  • At least 1x 48-port PoE switch in each edge cab
  • 1G to the desktop
  • PoE WAPs + wireleess controller
  • VoIP Phones
  • On-site File servers seem to becoming redundant?
  • At least 2x hosts for virtualisation
  • UPS in each edge cab
  • Big-ass UPS in main cab
  • Generator (pipe-dream I guess)

  • Thanks 1
Posted (edited)
Keep the number of cabs / coms rooms to a minimum. I would expect only 2 in a typical new build 1,200 capacity secondary school. Edited by FN-GM
Posted
Keep the number of cabs to a minimum. I would expect only 2 in a typical new build 1,200 capacity secondary school.

 

Only 2? :confused:

 

No plans for IT suites?

Posted

Yes - One of the annoying things about our old (1982) building is the layout means we have multiple two switch stacks around the building, I hate it as the cost of replacing them all adds up (Granted they last forever but that's not the point) - Whereas our newer buildings just have two main stacks of 3/4 switches for the entire building as it was built with networking in mind. Keep it low where you can.

In terms of server provision, you won't really need much now with most stuff going up the cloud...

Posted (edited)
Only 2? :confused:

 

No plans for IT suites?

 

Yep - all our secondaries have 2 cooms rooms where all data points go back to (including IT rooms). In these they have stacks of switches. All within 100m on the points. No point having more cabinets if you don't need to.

 

Pic attached.

IMG-20160803-WA0019.jpg

Edited by FN-GM
  • Thanks 2
Posted (edited)
Yep - all our secondaries have 2 cooms rooms where all data points go back to (including IT rooms). In these they have stacks of switches. All within 100m on the points. No point having more cabinets if you don't need to.

 

Pic attached.

 

No the less cabs the better, sometimes you've got to play the hand you're dealt though if you work in an older school for example. A lot of ours is listed so what can be done is limited.

 

All within the distance run of Cat5/6 etc too? That's amazing and an incredible achievement!

 

Are your schools relatively new builds?

Edited by DrBeaker
Posted
Yes - One of the annoying things about our old (1982) building is the layout means we have multiple two switch stacks around the building, I hate it as the cost of replacing them all adds up (Granted they last forever but that's not the point) - Whereas our newer buildings just have two main stacks of 3/4 switches for the entire building as it was built with networking in mind. Keep it low where you can.

In terms of server provision, you won't really need much now with most stuff going up the cloud...

 

One of our old builds was like that. They had comms cabs all over the show. Much better in the new buildings. Cheaper and easier to manage.

 

An example of it being cheaper is that not all the switches need to be POE. We just patch up POE ports where required. When we had cabs all over the show all of them needed to be POE so the cost increased.

Posted (edited)
No the less cabs the better

 

Thats what I said? :confused:

 

No the less cabs the better, sometimes you've got to play the hand you're dealt though if you work in an older school for example. A lot of ours is listed so what can be done is limited.

 

Exactly - but the OP has new building. Luckily!

 

 

Are your schools relatively new builds?

 

The secondaries are 6 year old. All CAT 6 within distance.

Edited by FN-GM
Posted

We have a few new schools opening, one secondary new build will be setup as FN-GM said, all cables run back to the Server room with no additional cabinets around school (6 x 42u cabinets) vs an old building with 16 switch cabinets spread around

 

Same with a primary opening soon, everything is run back to the one room.

 

I would make sure ducting is put in outside so BT and Virgin can use in future, ceiling height network points for WIFI, points where you may want digital signage and CCTV etc the designers will group network points together so check at front of classrooms

  • 6 months later...
Posted
We are in a very similar position having 160 place special school completing late 2020 so would love to open some dialogue with others in similar situations to see what they'd do if anyone would be happy for some email/calls?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...