Jump to content

Recommended Posts

Posted

(Please move if in wrong area)

 

Our Swimming Pool from September is going to be open for general use and our Bursar and swimming pool manager want an card reader for people to check in and out so we have an electronic copy of it.

 

Does anyone else have this in place? Or now any system that is good for this?

 

Not sure if I could get away with a pc with a USB nfc card reader on or a raspberry pi. Need to do some research.

 

Thanks

 

Dalek

Posted

Sounds an interesting challenge.

 

Are you intending to restrict access (i.e. gate remains locked unless card swiped) or just log access (swimming pool open, please remember to swipe card on entry and exit). Latter would probably be simpler to implement but former ensures only those who are approved are granted access. You'd have to worry about maglocks, failsafes, training, people holding doors open for others, etc etc with the former too.

Posted (edited)
have you got any door access software or hardware being used?

 

Only software/hardware we have like this at the moment is our Papercut runs off the staff id cards NFC

 

Sounds an interesting challenge.

 

Are you intending to restrict access (i.e. gate remains locked unless card swiped) or just log access (swimming pool open, please remember to swipe card on entry and exit). Latter would probably be simpler to implement but former ensures only those who are approved are granted access. You'd have to worry about maglocks, failsafes, training, people holding doors open for others, etc etc with the former too.

 

More of a log system I believe, so they swipe when they enter and leave.

 

Edit: i'm not sure what they are doing on the security front, might just be the lifeguards checking whos who

Edited by DalekSec
Posted
What Membership Management System are you using? Most have integrations for this type of thing

 

We don't have any membership management system.

 

My current idea is a PC/Raspberry pi with a NFC card reader attached, people come in swipe the card and the PC/Pi recognises the NFC ID from a pre-populated table and in another table puts them in a check in / out spreadsheet,

 

Something along those lines anyway!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...