cpjitservices Posted June 19, 2015 Posted June 19, 2015 Hi all, im looking at putting in a 3cx box at home, I'd like to get rid of landline but cant do that as Im in KC land tied to a fiber package with my landline. So I want to build my 3CX system to work over my landline rather than the internet! What will I need, Obviously ill have to have my 3CX sytem plugged into my phone line - what sort of device do I need to connect my server to landline to make and receive calls ? The plan then is once it working to be able to use softphone in my office and a couple of handsets downstairs into a POE switch. Can this be achieved ? thanks in advance all.
MatthewL Posted June 19, 2015 Posted June 19, 2015 Have a look here. Other option to bin your PSTN (just dont plug anything into it) and get a SIP line. Surprised you haven't run your own fiber to your house!
Meldrew Posted June 21, 2015 Posted June 21, 2015 We've tried a Cisco SPA 3102 to do this, costs I think around £30, but we have had some echo issues, that may be just our configuration. I know 3cx used to be compatible with skype - might be worth a look... Meldrew
jtoland Posted June 21, 2015 Posted June 21, 2015 We use 3cx at work and use a gateway to our lanline i will check the model tomorow for you it was pritty easy to setup aswell 1
plexer Posted June 21, 2015 Posted June 21, 2015 supported gateways Which VoIP Gateways does 3CX Phone System Support? Ben 1
cpjitservices Posted June 22, 2015 Author Posted June 22, 2015 Thanks guys, Ive got all my inetrnal extensions etc working and remote ones too and 3CX phone on mobiles. Just want to get it hooked into landline now and working, only gateway I have kicking about is a 4 port Pheenet (Solwise). It has FXO ports so that should be what im looking for ? Thanks
pcstru Posted June 22, 2015 Posted June 22, 2015 Just want to get it hooked into landline now and working, only gateway I have kicking about is a 4 port Pheenet (Solwise). It has FXO ports so that should be what im looking for ? That sounds about right. I guess you could just configure that as an IP trunc within 3CX, similar to the supported Beronet BeroFIX.
cpjitservices Posted June 22, 2015 Author Posted June 22, 2015 That sounds about right. I guess you could just configure that as an IP trunc within 3CX, similar to the supported Beronet BeroFIX. Yeah, once I have figured it out lol
cpjitservices Posted June 24, 2015 Author Posted June 24, 2015 Thanks folks, managed to get it all going after a few hours of tinkering. Now, Just need some IP Phones!!!!!!!!!!!!!!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now