Clients Not Seeing RIS

[thegrassisgreener]

Just installed RIS but my clients are not seeing the RIS Server,

 

when detecting DHCP I get a message saying - no boot file recieved

 

any suggestions?

 

thnaks

[pete]

Is the tftp service running?

 

Do you have storm protection and / or spanning tree enabled on your switches - it can affect the reliability of tftp.

[djm968]

Authorised RIS in Active Directory?

 

After you install RIS, the RIS server must be authorised in Active Directory.

 

Authorisation determines control of which RIS servers can serve client computers on the network. If the RIS server is not authorised in Active Directory, client computers that request service cannot contact the RIS server.

 

http://support.microsoft.com/kb/325862#

[thegrassisgreener]

Yes I have authorized it in AD and Granted all the correct permissions.

 

thanks

[djm968]

Do you have storm protection and / or spanning tree enabled on your switches - it can affect the reliability of tftp.

 

I had a similar issue at a School in Reading.

 

To rule out the switches connect your RIS server and a test workstation to an unmanaged switch. If DHCP is running on another server, you will need to uplink to the swicth the DHCP server is running on and make sure you disable DHCP service on the RIS server.

[mrbios]

Are you trying to image over different subnets? if so you might have to name the RIS server and boot file name in your DHCP scope options

[greenfieldsupport]

after authorizing in AD I tried everything to get mine to work... got sick and came back the next day to find it working...

 

perhaps you should do the same

 

It seems to take a while...

[greenfieldsupport]

oh and make sure you have it set to be a "trusted server" or similar in DHCP, i forget the terminology, if you want me to go and check i will