[mdt] Network driver error during deployment

[denmyos]

I'm suddenly getting this error during deployment.

I't seems that I have all the rigth drivers in mdt, but I'm still getting this error.

When I install the NIC driver directly into the OS, and i reboot the computer the deployment will finish, but with errors.

 

 

 

 

This is the NIC driver I'm using.

 

; ** COPYRIGHT © 2007-2013 Realtek CORPORATION

;

; Realtek PCIe FE Family Controller

; Realtek PCI GBE Family Controller

; Realtek PCIe GBE Family Controller

;

 

 

[version]

Signature = "$Windows NT$"

Class = Net

ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}

Provider = %Realtek%

DriverVer = 06/18/2013,7.073.0618.2013

CatalogFile.NT = rt86win7.cat

 

 

[Manufacturer]

%Realtek%=Realtek, NTx86

 

 

[ControlFlags]

ExcludeFromSelect = *

 

 

 

 

[Realtek.NTx86]

; 8169 Cardbus Jumbo 7k

; remeber to remove from OEM INF list

%RTL8169.DeviceDesc% = R8169C7k.ndi, PCI\VEN_10EC&DEV_8169&SUBSYS_03351154

; 8169 S-32

%SMC9452TX.DeviceDesc% = RTL8169.ndi, PCI\VEN_10EC&DEV_8169&SUBSYS_EE221113

 

 

 

I've tryed using using this tutorial

 

MDT 2012: Missing network drivers during LTI boot | Scriptimus Ex Machina

 

But i'm still getting the same error.

 

 

I'm not sure which drive this is is.

 

Pci\ven_10EC&DEV_8168&SUBSYS_308917AA&REV_04

 

when i google it i'm not getting anything use full. (that could just be me not being able to read pci\ven........ correctly)

[Davit2005]

We deploy our drivers by using a WMI query and selection profiles. Is that similar to what you are doing??

 

There is a different Inject Drivers task for each model which uses a selection profile and the WMI query installs the drivers depending on this.

 

What hardware is it for by the way???

Edited October 15, 2014 by Davit2005

[GRitchie]

From what I can see it looks like it's the network card driver - I've had this in the past, just look up the driver on the laptop manufacturers website, add it to the OOB drivers folder and then ensure you update the deployment share.

[denmyos]

From what I can see it looks like it's the network card driver - I've had this in the past, just look up the driver on the laptop manufacturers website, add it to the OOB drivers folder and then ensure you update the deployment share.

 

That's what I'm doing.

The driver works when I install it directly in the OS, but when I extract the driver with Backupdriver and import it into OOBD, (i have also implemented the correct drivere directly into OOBD) it does not work when I deploy the OS.

And I have also updated the deployment share from scratch.

[denmyos]

We deploy our drivers by using a WMI query and selection profiles. Is that similar to what you are doing??

 

There is a different Inject Drivers task for each model which uses a selection profile and the WMI query installs the drivers depending on this.

 

What hardware is it for by the way???

 

 

We deploy our drivers by using a WMI query and selection profiles. Is that similar to what you are doing?

 

I don't make a WMI query (a little to advanced for me), but I do have selection profiles, where my driveres are selectet, they are also selected in my TS.

 

 

What hardware is it for by the way???

 

Lenovo m78

 

 

 

PS. I'm not pxebooting, I'm using a USB to boot from. My PXEbooting is still not working.

[sted]

That's what I'm doing.

The driver works when I install it directly in the OS, but when I extract the driver with Backupdriver and import it into OOBD, (i have also implemented the correct drivere directly into OOBD) it does not work when I deploy the OS.

And I have also updated the deployment share from scratch.

 

By install manually do you mean point device manager at an inf file or run an exe?

[denmyos]

By install manually do you mean point device manager at an inf file or run an exe?

 

point to a inf file.

 

I just tried to deploy a Dell 390.

change selection profiles to Dell 390 in both TS and in Windows PE-> drivers and patches.

The deployment went straigth through with no error what so ever.

Edited October 16, 2014 by denmyos

[denmyos]

I'M A IDIOT!!!!!!

 

I SPEND A DAY AND A HALF TO FIGUR OUT THIS PROBLEM.

 

It turned out that I had disable the driver folder. :(

 

Which leads to a new question.

Is there a way you can see if a folder is Enable or disable without going into the folder to check.?

Edited October 16, 2014 by denmyos
Profanity!!

[denmyos]

apparently I'm still having NIC driver issues.

 

I have notice that i'm getting this error thru out my dism.log when I regenerate my deployment share

 

 

2014-10-24 15:39:02, Info CBS Wintrust catalog support is not present; skipping synchronous catalog installation (possibly expected) [hrESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]

2014-10-24 15:39:02, Info CBS Failed to load catalog installation apis (possibly expected). [hrESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]

2014-10-24 15:39:02, Info CBS Failed to find a matching version for servicing stack: C:\Users\JESPER~1\AppData\Local\Temp\MDTUpdate.3320\Mount\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.16384_none_9dff25cfe2e40fa2\ [hrESULT = 0x80070490 - ERROR_NOT_FOUND]

 

2014-10-24 15:39:02, Info CBS Failed to find servicing stack directory in online store. [hrESULT = 0x80070490 - ERROR_NOT_FOUND]

 

 

2014-10-24 15:39:12, Error DISM DISM Driver Manager: PID=2088 TID=3844 Failed to install the driver package 'C:\DeploymentShare\Out-of-box Drivers\Net\Netrtle_5.812.0515.2013_1C536289035857973DB21EEBAFB91286F8637A91\Netrtle.inf'. - CDmiDriverStore::Import(hr:0x80070002)

2014-10-24 15:39:12, Error DISM DISM Driver Manager: PID=2088 TID=3844 Failed to install the driver package 'C:\DeploymentShare\Out-of-box Drivers\Net\Netrtle_5.812.0515.2013_1C536289035857973DB21EEBAFB91286F8637A91\Netrtle.inf'. - CDriverPackage::InternalInstall(hr:0x80070002)

2014-10-24 15:39:12, Error DISM DISM Driver Manager: PID=2088 TID=3844 base\ntsetup\opktools\dism\providers\dmiprovider\dll\driverpackage.cpp:380 - CDriverPackage::InstallEx(hr:0x80070002)

 

2014-10-24 15:39:12, Error DISM DISM Driver Manager: PID=2088 TID=3844 base\ntsetup\opktools\dism\providers\dmiprovider\dll\drivermanager.cpp:1075 - CDriverManager::Internal_DoAddDriverPackage(hr:0x80070002)

 

2014-10-24 15:39:12, Error DISM DISM Driver Manager: PID=2088 TID=3844 base\ntsetup\opktools\dism\providers\dmiprovider\dll\drivermanager.cpp:523 - CDriverManager::ExecuteCmdLine(hr:0x80070002)

 

2014-10-24 15:39:12, Error DISM DISM.EXE: DriverManager processed the command line but failed. HRESULT=80070002

 

 

Any help would be appreciated, I'm really getting behind scheduled.

 

Hmmm, this is weird.

 

When I try to deploy a Lenovo M78 I get a

 

"A connection to the deployment share

(xxxxxxxxxxx....) could not be made.

No networking devices were found on this machine!"

 

And it only happens to the M78, not to other Lenovo computers.

 

So how do I force a NIC driver on to my USB stick (which I use for booting) that fits the M78.

Edited October 24, 2014 by denmyos

[denmyos]

Here is a link to the dism.log

I have a lot of errors in it.

 

http://1drv.ms/1xoMnt9

 

- - - Updated - - -

 

Here is a link to the dism.log

I have a lot of errors in it.

 

http://1drv.ms/1xoMnt9

 

 

 

I have done a little testing.

 

I took the boot.wim from my USBstick which I use for deploying.

 

Copying the boot.wim to my client c:\ and mount it.

 

Looked through the filerepository and found the .inf driver file and installed it through the device manager and it worked.??

 

 

 

 

So the driver are on the boot.wim and they are working.

 

So why won't they install during deployment?

Edited October 26, 2014 by denmyos