Jump to content

Recommended Posts

Posted

Hi all, I'm hoping one of you can help me with an xmas nightmare :)

 

I have some mains smoke alarms in my house, model Ei141 that are beeping every 40 seconds. First thought was of course battery backup which didn't work, so far I've tried.

 

1. Replaced batteries in both sensors with Duracell as that's what the book recommends as 'some' 9v batteries won't work.

2. Read the book and turned them off at the mains, removed battery, held reset button, replaced battery and turned back on.

 

 

They're still beeping every 40 seconds even when off at the mains with no battery in (err I know) but when I turn off the mains they show a red light so I'm definitely turning off the correct breaker. Can anyone suggest anything to save me from this noisey hell over xmas?

 

Thanks all and merry crimbo :)

 

C. monster

Posted

This....

 

 

 

 

 

 

 

 

 

 

 

 

 

 

http://us.123rf.com/400wm/400/400/auremar/auremar1205/auremar120506153/13882040-builder-holding-sledge-hammer.jpg

  • Thanks 1
Posted
They beep with no power source? I think there still a power source there that you're going to need to find and possibly replace.

 

 

I'm trying to work out if there is another battery somewhere. The trip is off and the no power light comes on, then I pull out the batteries and there's still a beep. I'm wondering if there is a battery in the base somewhere. As they don't beep continuously its difficult to trace the exact source.

Posted

I've just discovered that the beeping was the carbon monoxide detector :-)

Oh well at least all my smoke detectors have new batteries, though they do still have an occasional flashing red light on but I'll investigate that in a bit.

Posted
I've just discovered that the beeping was the carbon monoxide detector :-)

Oh well at least all my smoke detectors have new batteries, though they do still have an occasional flashing red light on but I'll investigate that in a bit.

 

The CO detector beeping isn't good news unless that has a low battery! My smoke alarms flash occasionally to show that they have a battery in them, as does the CO detector, so hopefully everything is working for you now!

Posted
CO beeping intermittently would be low battery if it was detecting CO I'm sure it'd do more than just beep every now and then :)

 

Ben

 

LOL indeed. We have a battery operated Smoke and CO alarm and when it goes off a strident female voice orders you about:

 

"WARNING! FIRE!"

 

or

 

"WARNING! CARBON MONOXIDE!"

 

She is very loud and aggressive XD I may nickname her Prudence

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...