Panasonic Touch-Screen TY-TP42P8-S Windows 7 Driver

[bertster]

Anyone know of the existence of a Win 7 driver for the Panasonic Touch-Screen TY-TP42P8-S?

 

Have found the XP one and tried that in hope that it might work but unsuccessful.

 

Thanks

[pavlovs_dog]

PM sent with link.

[bertster]

Thank you pavlovs_dog - Will try it on next visit to that school.

[Dogsbody23]

Hi I am in need of these driver would you be able to post the link for it, or pm it to?

 

Thanks

[KarlBlacklock]

Hi,

 

I also need the windows 7 drivers for this panel. Do you still have them?

Thanks

Karl

[MrPstv]

Hi and Help,

 

An act of kindness from anyone who can point me in the right direction of a Windows 7 driver that works for the PANASONIC TY-TP42P8-S.

 

Ta Very much...

[MrPstv]

Any idea's?

[MrPstv]

Driver needed driver needed as the driver from the Panasonic website does not work with Windows 7.

[Beardedgelfing]

Hi, Also looking for windows 7 driver for the Panasonic TY-TP42P8-S anyone have a link please share.

[toddadd]

Hi

I too would very much like a driver for the Panasonic Touch-Screen TY-TP42P8-S that works with Windows 7. Please tell mw the version number and send me a link.

[3s-gtech]

Have you tried using the later 2.49 drivers, installed through Device Manager? You may be able to massage the 1.4 version into working on 32 bit Windows 7, but not 64 bit.

 

Software Download | Download | Professional Displays | Panasonic Global

[toddadd]

Thanks, I installed the 2.49 version from Device Manager but am still not getting the USB-serial touchpad driver not found. I hear the wrong noise when plugging in the USB. I have tried compatibility mode for LSADRV as well and updated all the drivers for the HP PC. It used to work...

[MrPstv]

I have battled with this and i lost!

 

Contacted Panasonic and no reply which equates to no solution.

 

 

Buy a new interactive plasma,

Keep Windows XP,

Battle on.

[toddadd]

I have now go the 2 touch screens working. I used ver 1.4 on 32 bit Windows 7 PC's. The first thing to appear is the Matsushita serial bridge which gives you USB connectivity. I used device manager and update driver to use the downloaded software. After this I did the same just used all the available folders in turn until something worked. http://panasonic.net/prodisplays/download/software/download/TouchPanelDriver_v14.zip. If you have the time it does work.

[dxjhelp]

Hey toddadd. I have just tried your method with on the same model touch panel display. The drivers do install successfully, but I am still not getting any response from the TY-TP42P8-S.

 

What I did:

Set up a test machine with windows 7 32 bit. Plugged in the usb cable, downloaded the driver and extracted to a folder generated on the root of C (lets call it C:\Folder\), opened up device manager, right clicked on the first usb unknown device and clicked update driver. I looked through the folder C:\Folder\ and let the subfolders be searched too. The driver Matsushita serial bridge installed first. Tried the touch panel, no response. Saw there was another usb device that was unknown. I right clicked on that device and clicked update drive looking through the same folder and letting the subfolders to be searched too. The device got installed properly. When testing the touch panel again, no response. This is with both pen on and pen off.

 

Could you quite possibly provide a more in depth description on what else you might have done to get this to work?

 

Thanks again.

[doggox]

PM sent with link.

 

Hey there

I'm new here..

I also need the driver, are you still capable of sending it to me ?