talksr Posted July 9, 2012 Posted July 9, 2012 Hi, I need to get some Asset Security Stickers for the hardware at my school. I have found the following company: Pictures and images of sample designs I was just wondering if anybody uses any other companies and has any ideas on cost per sticker? We are looking for something which is as tamper resistant as it can be and something which will be long lasting.
soveryapt Posted July 9, 2012 Posted July 9, 2012 Not used a company for this, but I have bought theses (Silver Heavy Duty Labels | L6008-20 | Avery) and they seem pretty good at sticking and not being removed ..
HarryMonkey Posted July 9, 2012 Posted July 9, 2012 This place was always sending me catalogues. I believe my last place might have used some of their products. Asset Tags & Labels - Seton
sonofsanta Posted July 9, 2012 Posted July 9, 2012 We use the Seton stickers and they're well made, albeit not cheap. They're not immune to being piggled at and peeled off but then I doubt a sticker has been made that can resist the focused attention of a bored schoolchild.
pcstru Posted July 9, 2012 Posted July 9, 2012 We use Selecta Mark - which consists of stencils and chemical paint/etchant. It does resist tampering (it ends up etched into the item) but is quite pricey.
plexer Posted July 9, 2012 Posted July 9, 2012 We use Selecta Mark - which consists of stencils and chemical paint/etchant. It does resist tampering (it ends up etched into the item) but is quite pricey. Not a lot of use if you want to include a sequential barcode for tracking purposes though? Ben
Dos_Box Posted July 9, 2012 Posted July 9, 2012 Moving to Physical Security forum. This forum is for 'virtual' security
TechieWils Posted July 9, 2012 Posted July 9, 2012 +1 for Seton again, like has being said there not bullet proof but the best we've had
pcstru Posted July 9, 2012 Posted July 9, 2012 Not a lot of use if you want to include a sequential barcode for tracking purposes though? Ben We use sequentially numbered stencils but bar codes - probably not practicable as a stencil.
CyberNerd Posted July 9, 2012 Posted July 9, 2012 Not used a company for this, but I have bought theses (Silver Heavy Duty Labels | L6008-20 | Avery) and they seem pretty good at sticking and not being removed .. +1 to these. They saved us a small fortune as you print them yourself.
bossman Posted July 9, 2012 Posted July 9, 2012 I have had a look at seton and they rip your eyes out and then suck the juice out of the sockets nearly £1000 quid for 1000 labels!!!! I have found this Custom Labels - Asset Labels, Asset Tags, Warranty Labels and Calibration Labels the guy who I spoke to is a real gem and will help you every which way including discount for educational institutions as his wife is a teacher. They will send you out a sample which you can sort over the web. Cost for 2000 labels = £300 a lot less than Seton and good quality security tags they are with your own design and logo.
TechieWils Posted July 9, 2012 Posted July 9, 2012 I have had a look at seton and they rip your eyes out and then suck the juice out of the sockets nearly £1000 quid for 1000 labels!!!! Greatest comment on a price I have ever read! They are well expensive, may have to take some of these suggestions to the boss.
chris_randsom Posted July 12, 2012 Posted July 12, 2012 We used to purchase our tags from Seton, but found they were a bit too expensive. We switched to another company as they were a fraction of the price, although we experienced problems with the print rubbing off. We now use a company called Tollgate Labels for marking our IT equipment. They offer a good service and we have always found them to be competitive. I think we pay around £290 for 2,000 tags. They've only failed once to deliver on time and that was during the heavy snowfall we encountered last year. Hope this helps :-)
plexer Posted July 12, 2012 Posted July 12, 2012 We use these: TripleBond Labels | L6140-20 | Avery Ben
TechMonkey Posted July 13, 2012 Posted July 13, 2012 Slightly OT but this article just popped into my email QR tagging your inventory. It's geared towards Spiceworks but I'm sure could be adjusted.
plexer Posted July 13, 2012 Posted July 13, 2012 I thought of using QR codes and including basic info on the machine so you didn't need to look it up you could just zap it and you'd get the warranty details, contact numbers etc.... Ben
Fazza Posted July 13, 2012 Posted July 13, 2012 In the past I've used SelectaMark for marking the equipment with the schools name and postcode and Seton stickers for asset tags - for the asset tags you have to think carefully where to put then so the 'little rascals' dont draw all over them or hack away at them with a pen and remove parts or all of the asset sticker.
hardtailstar Posted July 13, 2012 Posted July 13, 2012 This place was always sending me catalogues. I believe my last place might have used some of their products. Asset Tags & Labels - Seton we use them, very sticky and hard to take off by small children!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now