IanT

I did a big deployment last year for a school of 2920 models, stacked them bad boys!

Nice - what models?

Networking Training - Education Services - United Kingdom and Ireland | HPEâ„¢ https://certification-learning.hpe.com/tr/datacard/certification/Aruba-ACSAV1

Here is a list of NICs for this server: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c03263146&docLocale=en_US HP networking: HP NC112T PCI Express Gigabit Server Adapter 503746-B21 HP NC365T 4-port Ethernet Server Adapter 593722-B21 HP Ethernet 1Gb 4-port 331T Adapter 647594-B21 HP Ethernet 1Gb 2-port 332T Adapter 615732-B21 HP Ethernet 1Gb 2-port 361T Adapter 652497-B21 HP NC523SFP 10Gb 2-port Server Adapter 593717-B21 HP NC552SFP 10Gb 2-port Ethernet Server Adapter 614203-B21 HP Ethernet 10Gb 2-port 530SFP Adapter 652503-B21 HP Ethernet 10Gb 2-port 560SFP+ Adapter 665249-B21 HP Ethernet 10Gb 2-port 530T Adapter 656596-B21 HP Ethernet 10Gb 2-port 561T Adapter

What network you got going into the new build?

https://www.router-reset.com/reset-manuals/Meru-Networks/AP320

I remember putting in the 2530s when they were first released, very buggy!, with a few software releases they are much better, not bad switches at all.

Why would you want to replace out the 2530 models?!

Create an ACL on your layer 3 core

I've worked on the SG300 model switches, they are terrible switches - hate them.

HPE Support document - HPE Support Center

got two hp msm422 from ebay - can run in controlled and standalone mode

integration tools on Server 2016 are now installed via Windows Update https://rlevchenko.com/2017/02/18/faq-windows-server-2016-and-hyper-v-integration-services/

Are any of the Cisco 3560s, 2690s & 3750s stacked?

2920 switches are your gold standard HP edge switches, 10gig uplinks, stacking etc 2530 models should do you just fine regards to stopping loops, make sure you spaning-tree, loop-protection etc, take a look at this PDF: http://whp-hou4.cold.extweb.hp.com/pub/networking/software/2510-AdvTrafficMgmt-July2007-59914762.pdf

What model HP Switches are dying on you? lifetime warranty rings a bell on most procurve products

We always shut/disable default VLAN1 in are network designs.

HP do the 10gig version, part number: J9283A But if you only need 1gig just get a copper SFP

Hello - I am selling a working PC, details below: Intel Xeon E3-1220 v3 @ 3.10Ghz (Processor) https://ark.intel.com/products/75052/Intel-Xeon-Processor-E3-1220-v3-8M-Cache-3_10-GHz Gigabyte GA-Z97P-D3 (Motherboard) GIGABYTE - Motherboard - Socket 1150 - GA-Z97P-D3 (rev. 1.1) 8Gb of DDR3 Memory New Case + 400 Watt PSU AMD Radeon HD Graphics Card 1Gb PCI-Express Built-In Soundcard Comes with Windows 10 Pro - 64-bit (Fully Activated\Legal!) £200

https://jobs.theguardian.com/job/6397282/ict-technician/

Proxy Exception or Create a firewall rule with Office 365 IP Addresses etc, see below https://support.office.com/en-gb/article/URLs-and-IP-address-ranges-for-Office-365-operated-by-21Vianet-5c47c07d-f9b6-4b78-a329-bfdc1b6da7a0

Are you using Hyper-V Clustering or Shared-Nothing Storage here?

any help below? Diagnosing Live Migration Failures (Part 1)

I would hold off jumping ship to Windows Server 2016, its only just been released. In relation to your question though, without looking at the GPO side of things just stop\disable the Windows Update Service.

Run Packet Tracer from ASDM