Sunnyknight

Yes to cleaning cpu, yes to heatsink, no to the card.

Yes, yes, no to everything else

Mac... it depends on the paste. For AS paste its recommended you use the credit card method. Google it.

Someone kill mac before i do. Lol Mac. The required ones come with your case or mobo.

Jdhcjrmiqjxbeuqkfnf Wait til i get home. Lol

What! Gosh yer such hard work. I will train you to become a lethal force of the galaxy uoung padawan. The top and bottom of the i/o shield pins go above the rear panel (with the usb ethernet sata sound connections) and below it. Sort of like.... .... --- - - - - --- .... Dots being the io shield and the lines accounting for the panel.

What the f...... Lol Mac. Google i/o shield. You attach that to the rear inner side of the case. Then install the mobo. Top and bottom pins go above and below the rear socket.

They have bikes... new crafting system... new zombie system... scouts.... new shops.... everything is mad!!! Me bro and cousins play it daily.

At our school, our disaster recovery was:- 'Assess the damage, and salvage what we can'. Brilliant plan that. At the hospital i work at it's:- 'Hope everything burns down so that we can start over'. That's an even better one!

Keep off the legendary game that is 7DTD there you noobs! DON'T RUIN A LOVELY GAME!

Standoffs - mobo - screws. That's how ive always done it. No issues... and this is with me having a minimum of 4 powercuts in a year while gaming. I mean if your are REALLY worried, go about... Standoffs - washer - mobo - washer - screw.

Never ever ever ever used anythibg like that. So I'd say no quite safely.

YOU WHAT!? lol!

I'm curious about one thing on the S36..... where is the res? Does it not come with one??? Do you fill the pump directly via a designated port and let it circle around the system until it's full? Do you fill it via the rad? (This is why you have a custom loop.) Thanks @Garacesh Anyhow, as for the s36, C L E A N the rad. Most of the time the rads are clean, but some have some form of oil on them, and it's thick oil, so it's best to give it a thorough wash. Installing the S36 should be a doddle. Install mobo cpu etc etc first, and S36 last. It can go either way with mounting it, but remember what we discussed @mac_shinobi. If you want it so that the fans PUSH out the air of the case, you'll need extra long screws. Otherwise, just mount it to the top of the case, and see how you go about the fans. If they push the air back into the case, consider having 2 - 4 fans pulling out (side \ back) and the front + x2 at bottom pulling in. Next phase will be filling / testing. This is a bugger to do on this system Mac... which is why i recommended the custom loop. Get a box of THICK tissues (kleenex are perfect) and place them all around the tubing, and over the components in your system that if *god forbid* the system leaked, it'd hit. This should be gfx, areas of the mobo, psu, hdd etc etc. Just place them over, don't throttle them inside anything. About 4 tissues over the gfx is safe, as a example. To FILL the system.... you need to fill it with your purchased liquid through the dedicated port on the cpu block / pump. Now, you can install the CPU block onto the CPU and do it, or do it outside of the case. However, it's recommended you do it inside the case. Get yourself some Primochill advanced tubing 13/10 - clear (about 1 meter) and see if you can safely add that to a 13/10mm fitting. This will allow you to fill the system safely. OOOOO also get a funnel. They help. Now i don't know if its included, but you should get one of these XSPC PSU Bridging Connector (24 Pin) [] It'll start the psu but not the mobo / hdds. This will allow the pump to run and pump around the liquid through the closed system. As it's doing this, keep filling until you can't fill anymore. Once you've reached that point, quickly shut off the system. Now, wait about 1 min for the fluid to settle. Slowly and i mean this, SLOWLY, remove the tubing and then quickly replace the tubing / fittings with the dedicated nut / bolt / whatever was there before. Heart attack over. That's the worst part of it. Let me try and recap. Make sure your system is built bar the watercooling unit. Remove everything related to the WC kit Clean the rad thoroughly Install the fans onto the rad in the desired position Attach the rad onto the case Cover the internal components with tissues, 4 over each component should be safe. (careful not to block the psu too much) XSPC PSU Bridging Connector (24 Pin) [] attach that to the motherboard 24atx pin (or 20 pin?) TEST to make sure when you power on the system, only the psu is running. If not, remove all sata cables, fan, and gfx from the mobo. (keep the bridger connected) If you don't have already (unless they have a specific fitting they provide) get yourself some primochill advanced tubing 1 meter with fittings. 13/10mm. AND a funnel! Attach the fitting to the fill port. Attach the tube to the fitting and tighten well. Put the funnel inside the other section of the tube. Fill with desired liquid. Power on the system while filling. The fluid will pump around the system. Once the system has enough liquid, it may start entering the fill port tubing. This is your message to power down the system. Wait 1 - 2 min. Prepare to replace the fitting with the original fixture. Remove the FITTING (not tubing) and without panicking, put back in the fitting. There may be some spillage, but as long as you're calm, contained, and have covered everything well, you'll be fine. If there is spillage, press onto the liquid with the tissues, dabbing on and off to remove. Keep doing until satisfied. Collect yourself, and add components back into the system if previously removed. Replace all tissues with fresh ones over components. For the next 30 mins, you will be checking for leaks. Power on pc, leave for 10 seconds and turn off. Do this about 30 times with 1 min between to check for leaks. You're now free and a beginner in the watercooling world. Welcome. As for the grommets, what the hell you on about? lol

Price? xD

My fault for skim reading. GO MAC GO! GO YOU SEXY BEAST! Fire it up, do a video, add pictures!!! LEMME SEE IT! @mac_shinobi

Given up on rare trading now. Have 6.6mil in the bank and i'm looking to pimp out my viper to the max. A heads up........ People are kitting out offensive cobras and vipers to use as pirate vessels to steal rare goods. I got interdicted about 4 times for my 50ton within 10 seconds each. Same person, but they're thirsty! After i escaped the last one, i logged out for 3 mins to cool my nerves and hope he vanished. He did. Flew to my station only to see him pop up behind. Never been so shocked.... Quick switched to my viper which had multi cannons and lasers on it and killed him in super cruise and interdicting. He apologized. Went back to my station, repaired my viper, logged out. Brilliant few hours.

@mac_shinobi Good build. Only downfall, not an i7 or custom wc loop. Other than that, good on ya lad!

Other than hearing a few creaks on the landing while everyone was asleep, nope. Nothing as of yet.

Socket change stays at the same price. EK do a full cover block for £79.

Wow.... that's.... something. Not sure what else to type other than that.... Outdoor cameras. Also, after reading all the comments, i'd like to say Thanks to those who shared, and nothing to those who proved less than helpful. Not believing in something is one thing, but mockery is something completely different. We saw it. Believe it or not. I no longer care about your opinion. Requesting this thread to be closed by Mods / Admins @Dos_Box Once again, thank you to those who took the time out to type something constructive.

Because it happened, it's spooky, and i'm not here to make movies, i'm here to try and get advice if possible, or see if anyone has had any similar experiences, as well as resolutions if any.

It happened. That's all i'm saying to that and any other reply similar.

Yeah i've heard sounds like footsteps upstairs ( while people asleep) when playing on my xbox downstairs... but i just assumed the floor boards are just contracting or expanding depending on the heat.... or something.... OMG I NEVER THOUGHT ABOUT THAT UNTIL NOW!! Seeing a shadow... how are you not.... what! That's dodgely scarily WEIRD. Mate, how are you not on the same level as me? surely.... that's proof-ish.... that there's some form of entity around.... O.O wow.....

A thought keeps going through my head.... Ghosts are.... ghosty right.... as in they can't touch anything.... so.... how did the handle go down and back up with the door opening.... like.... that seems entity based. We don't have a pet... no windows were open in the kitchen... and even if it was... WIND doesn't do that! I'm sounding coo coo, i feel like i am by reading this over.... but.... i dunno. *shakes head*