Joeloman

My advice is to check with support, if they can fix it via the console. Then it depends on your setup if it's time to switch to Newport listen to support regarding that too. I haven't run the latest released version with DHCP but I have tested various Betas with DHCP and you have significantly better features in the new one.

You also need to enter IP addresses under Interfaces. FYI: Newport has a new way to enter DHCP if I remember correctly.

If you have an MDM solution, you can easily push out what you want. Turn a website into an app in Safari on iPad Open the Safari app on iPad. Press the share button when viewing the website, press the more button, and then tap Add to Home Screen. Turn on Open as Web App. Tap Add. The icon will only appear on the device where you add it. In a school environment, they are usually used for many different educational games that then become easier for the student to find, as they recognize the icon.

Have you turned off Safari browser on your iPads?

Smoothwall Cloud Filter for iPads has its own browser to get around the restrictions that Apple has against third parties. It works really well and users usually don't notice any major difference except that they don't get past the filter via proxy and other tricks.

Not really an answer to your question, but wouldn't it work to let them log in via the browser? Normally, most apps are blocked in a school environment, as some use cert. pinning and then it's better to always let them use the browser. Another option is Smoothwall Cloud Filter which then has its own browser for the iPad.

In the same group as Smoothwall, there is Qustodio, which does parental control. Is one of the best on the market and will probably build on the same content filter that Smoothwall uses in a few years. https://www.qustodio.com/en/

This was written by Smoothwall yesterday. https://smoothwall.com/resources/tim-levy-uk-social-media-ban We have the same debate in Sweden, where there will probably also be a ban. Many believe that this will mean that children will seek out other platforms where there is no control whatsoever.

I don't think the answer you got from support is entirely correct.. The size itself is probably not a big problem, but it is the large daily changes in this category that mean that it can take a while to start up. Since most browsers today have this protection built in from the start, Smoothwall probably considered it unnecessary to have double protection in Cloud Filter. Today, browsers often use AI as well as real-time scanning to find this type of threat. https://support.google.com/chrome/answer/9890866#zippy=%2Cenhanced-protection The reason why they have chosen to keep that category on premise for the time being is probably because they want continued support for the Internet of Things (IoT) and older devices with old browsers. The category already exists and is updated automatically from various sources and there is no problem with the update in equipment that is on 24/7.

Could there be a mistake in this KB regarding Edge and Force Windows executable Native Messaging hosts to launch directly, as it does not mention Edge. https://kb.smoothwall.com/hc/en-us/articles/20641568699804-Chrome-and-Edge-browser-configurations-for-Cloud-Filter-Extension The same setting is available for Edge: https://learn.microsoft.com/en-us/deployedge/microsoft-edge-policies/nativehostsexecutableslaunchdirectly

You don't have a firewall rule that blocks? I was wondering if you block UDP traffic on port UDP port 3478 (for WebRTC/STUN media traffic) The old setup was to approve traffic out of TCP port 5222 but if it is blocked it goes to TCP port 443 (HTTPS) Maybe you are blocking something with Layer 7? This is peer to peer... It has been working for a long time... However, I have not tested with the Cloud Filter extension and unified client, only the old proxy setup.

I doubt it's Smoothwall, but we'll see what support finds. It would be good if you could tell us a little more about your setup. Which operating system and browser are you using? What are your hardware resources? Are you also using Smoothwall as a Firewall? How is your DNS set up? Have you tried changing it? Very often the problem is a slow Internal DNS that is also used for external traffic or you use your ISP DNS which can sometimes be very slow. If you have slightly older or less powerful computers try disabling TLS 1.3 Early Data in the browser, it never hurts to test. chrome://flags or edge://flags

Smoothwall has its own category for the web filter "Chrome Remote Desktop" It is under the Remote Access Tools group

If you have just switched to Smoothwall, you should contact your Smoothwall contact, so that they can properly look at your needs. Maybe switch to Smoothwall Cloud Filter with Azure login?

You should probably elaborate a bit more on what your setup looks like. Do you have an On Premise Smoothwall? What system do you use for auth? How do students log in and out?

It is <key>UserID</key> that retrieves the information of the person who is logged in.

According to the article, this is the information that should be entered: Moysle <dict> <key>SmoothwallSerialNumber</key> <string></string> <key>SmoothwallTenantID</key> <string></string> <key>UserID</key> <string>%ManagedAppleId%</string> <key>UniqueDeviceID</key> <string>%UUID%</string> </dict> If you don't have tenants set up in Smoothwall, just remove that line.

For this to work you need an MDM system. Have you checked this article? https://kb.smoothwall.com/hc/en-us/articles/4404006049810-Install-Smoothwall-Browser-on-iPadOS-and-iOS-devices

If we talk about porn, the system is extremely good at recognizing porn (perhaps because there is so much material to train the AI engine with 😀). You can set the sensitivity in three different levels. If you set the Sensitivity level to High, not much will get through that I would classify as porn. There is also another option you can make: Block Video - Automatically stops and blocks playing the video when inappropriate content is played for more than 5 seconds. To prevent the system from blocking educational videos, you can specify exceptions for YouTube channels and also specify exceptions for educational materials at the Domain and subdomain exclusions level.

I don't know if you know that Smoothwall is now using AI to block porn and gore content even in videos like YouTube https://smoothwall.com/ai-visual-safety-bundle Works really well in reality too 😀

Regarding ads in YouTube videos. Smoothwall fast forwards the ad and turns the screen black, so students don't see the ad but see a sign from the company behind the ad and there is a small interruption. This only applies to Smoothwall Cloud Filter https://kb.smoothwall.com/hc/en-us/articles/22648453339164-List-of-available-Content-Modifications

You have slightly different options depending on whether you use Cloud Filter or Onpremsie. https://kb.smoothwall.com/hc/en-us/articles/22648453339164-List-of-available-Content-Modifications Cloud Filter will later have the ability to turn off AI, but for now you can either use (&udm=14) for Google or use Google - Web search (basic mode).

I don't think this has anything to do with Smoothwall. Chrome and Edge made an update about 1 month ago that made the browser extremely slow, especially at startup, so many extensions have had to update their code to make the system work even on computers with low resources. What I think you should try on a test computer. In Chrome/Edge, try turning off graphics hardware acceleration and then restarting. If that doesn't help, turn off all extensions and see how it works. Then just turn on Smoothwall Cloud Filter and test.. if it works, then turn on one extension at a time until you find the one that slows down the system. If the error turns out to be with the Smoothwall extension, open a support ticket. Let us all know how it went with the test for you..

That's what makes Smoothwall so great! It's extremely easy to block different search terms (which you can also do yourself) but then there will be an extreme amount of overblocking. You probably want to be able to search for "How many people are injured in the UK each year by machete attacks?" Smoothwall normally only looks at the results of a search and leads many links to weapon pages, the results are blocked, but not the search itself. The page you link to is classified as weapons and shopping in our Smoothwall via the content filter. You should probably check that everything is set up correctly in your Smoothwall.

No, here it works as usual.. Do you have any examples?