Pumaedition Posted June 6, 2007 Posted June 6, 2007 Hey all, Am a bit of a newbie to Edugeek, but thought I would sign up, as you members seem to have a vast amount of knowledge which could come in handy! Basically, one of the websites our MFL department uses frequently, has decided, in all its wisdom, to upgrade the website so it will only work with Flash 9. We have tried a GPO install with an MSI previously downloaded, and although the computer will say it is installed, it really isnt, as none of the media will play off the website. So I am appealing to the good nature of you members to help me with this! Has anyone got an MSI which works perfectly all bagged up to send to me so I can use it...or a script or something that will aid it to work. I dont touch scripting or GPO's often (the Network Manager does that), so a step-by-step guide for an idiot is what is required! Thank You Muchly!
CESIL Posted June 6, 2007 Posted June 6, 2007 If you register with Adobe for a redistribution license (its free!) you are sent a link to download the latest MSI files. I did this yesterday and got the MSIs for flash and for shockwave and these have installed from GPO ok.
Pumaedition Posted June 6, 2007 Author Posted June 6, 2007 I have got the redistribution license. Will check out the MSI's. The ones i previously downloaded (couple of months ago now) didnt work with silent installs correctly, and everywhere I checked on t'internet people were saying about stripping down the MSI and re-building it...which sounded a lot of hassle!! Will check out Adobe now....
plexer Posted June 6, 2007 Posted June 6, 2007 If you download the ActiveX msi you shouldn't have any issues or need to repack it or anything. You may have to make sure that any previous flash installs are removed though. Ben
Pumaedition Posted June 6, 2007 Author Posted June 6, 2007 so a case of running an uninstallation script BEFORE running an installation script then? Hopefully shouldnt be too difficult.....
Pumaedition Posted June 7, 2007 Author Posted June 7, 2007 Just come across a twist to the tale. The vast majority of our computers run IE6, and Flash 9 doesn't seem to work. However, a quick (sarcasm) update to IE7 and all seems to be well. Came across this solution due to two identical laptops (both owned by the 2 members of our MFL dept) with the only difference being the versions of IE being run. The laptop with IE7 had no problems accessing the website required, yet the IE6 laptop couldn't access it. Upgrade IE to 7 and BINGO, it works. Could it be possible that Flash does not run via IE6, and does this mean I now have the fun job of distributing IE7 across the school computers...even though I am advised against it! Great!
Pumaedition Posted June 7, 2007 Author Posted June 7, 2007 that is good news to hear....this is going to sound daft, but how have you got IE6 set-up?! We are still waiting to hear from Adobe to get the downloadable MSI to stream it across the network (again) to see if we can get it working.
TechMonkey Posted June 7, 2007 Posted June 7, 2007 Wouldn't be linguascope would it? Just had this problem. We have Flash9 and it still said we hadn't got the latest version. Used the msi from http://fpdownload.macromedia.com/get/flashplayer/current/licensing/win/install_flash_player_active_x.msi and that seemed to work. The MSI is slightly different to the one we had so I think it must be still Flash9 but slightly updated (probably because of the Adobe rebranding) Got it working with IE6. I did use the uninstaller but I think just reinstalling the new version over the old would be fine. HTH EDIT: Oh and I am still waiting for the Adobe gumf after signing up for the license 3 days ago.
ShorehamGeek Posted June 7, 2007 Posted June 7, 2007 Linguascope broke here too! Similar story to Techmonkey. Seems to be working now (with the msi suggested by Techmonkey).
Pumaedition Posted June 7, 2007 Author Posted June 7, 2007 yeah, it is Linguascope! Didn't want to mention it incase it went against policy of naming websites and such like. I will try the MSI you have suggested....cheers dude!
Geoff Posted June 7, 2007 Posted June 7, 2007 yeah, it is Linguascope! Didn't want to mention it incase it went against policy of naming websites and such like. With holding information in situations like this is counter productive and just makes it harder for everyone to figure out whats going on.
Pumaedition Posted June 7, 2007 Author Posted June 7, 2007 yeah, it is Linguascope! Didn't want to mention it incase it went against policy of naming websites and such like. With holding information in situations like this is counter productive and just makes it harder for everyone to figure out whats going on. right you are
deKay Posted June 7, 2007 Posted June 7, 2007 We have come across EXACTLY the same problem this week, also with Linguascope. However, there are two further twists: 1) The msi takes a good 90 minutes to install. The Flash 8 msi on the same machines takes less than a minute. 2) After the msi installed, the site *still* doesn't work. Administrators access Linguascope, and pick an activity. Then, IE6 pops up with "you need to install an Active-X component", which you can click and all is well. However, this doesn't happen for non-admin users, meaning it's currently looking like I need to manually log on to all 600 machines, load a site with Flash 9 content, and click the install button. By 2.30pm tomorrow. IE7 is not an option.
Pumaedition Posted June 8, 2007 Author Posted June 8, 2007 We have come across EXACTLY the same problem this week, also with Linguascope. However, there are two further twists: 1) The msi takes a good 90 minutes to install. The Flash 8 msi on the same machines takes less than a minute. 2) After the msi installed, the site *still* doesn't work. Administrators access Linguascope, and pick an activity. Then, IE6 pops up with "you need to install an Active-X component", which you can click and all is well. However, this doesn't happen for non-admin users, meaning it's currently looking like I need to manually log on to all 600 machines, load a site with Flash 9 content, and click the install button. By 2.30pm tomorrow. IE7 is not an option. ah, the same problem I now have. However, logging on as administrator doesnt always solve the problem...as it comes up with "swpub.cab" cant be run as the publisher in unverified. In IE Settings, if you tick the "Use HTTP 1.1 through Proxy" box, it sometimes works...though isnt a guaranteed method!
TechMonkey Posted June 8, 2007 Posted June 8, 2007 We have come across EXACTLY the same problem this week, also with Linguascope. However, there are two further twists: 1) The msi takes a good 90 minutes to install. The Flash 8 msi on the same machines takes less than a minute. 2) After the msi installed, the site *still* doesn't work. Administrators access Linguascope, and pick an activity. Then, IE6 pops up with "you need to install an Active-X component", which you can click and all is well. However, this doesn't happen for non-admin users, meaning it's currently looking like I need to manually log on to all 600 machines, load a site with Flash 9 content, and click the install button. By 2.30pm tomorrow. IE7 is not an option. Something is horribly wrong then. the MSI takes about 90 seconds to install here and needs no intervention. Did you use the MSI I linked to?
deKay Posted June 8, 2007 Posted June 8, 2007 Yes, I used that MSI (although before I found this thread - it is the same link as the one I found elsewhere, and downloading the file now shows it to be identical). I've also tried the one Adobe linked me to when I registered - it too is the same. Is it possible it has something to do with having Flash 8 (the dev package) installed, maybe?
meastaugh1 Posted June 12, 2007 Posted June 12, 2007 I have 9.0.16 deployed and experienced the same issue with Linguascope. I've contacted Stephane@Linguascope and they are fixing the site now. If you take a look at the German preview site, that should be working.
deKay Posted September 12, 2007 Posted September 12, 2007 Did anyone ever solve the "only works for admins" problem with the plugin? Adobe "helpfully" acknowledge the problem, but don't offer a solution: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19166&sliceId=1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now