mac_shinobi Posted November 18, 2010 Posted November 18, 2010 Got a bunch of laptops laying around that will at some point require repairing. Currently the power packs them selves and the mains power lead have the wires showing but not bare ie no copper showing. Is there anyway I can physically take apart the power pack to re do the wiring and put it back together again - any guides ?? Dell D620, D630, Lenovo T61, T400, T410 Just to give you an idea of the laptop models we have. As per the image I have put a red rectangle around the areas where there are wiring issues on the power packs
plexer Posted November 18, 2010 Posted November 18, 2010 Someone else posted about laptop psu repairing yesterday, they are ultrasonically welded closed so you're only option is to source replacements. Ben
mac_shinobi Posted November 18, 2010 Author Posted November 18, 2010 They are broken anyway so was contemplating leveraging them up open and repairing them and some how putting em back together again ie super glue or plastic glue ?
CESIL Posted November 18, 2010 Posted November 18, 2010 Last time I tried to something like this I found that the unit was filled with resin to seal all the parts in so I couldn't get at any electrical bits at all.
plexer Posted November 18, 2010 Posted November 18, 2010 With the danger of exposing live parts to the user? an attemp to reseal them may also be failed by the pat. Ben
Guest Guest Posted November 18, 2010 Posted November 18, 2010 You can get power bricks for most old laptops for £7 now off ebay. So if it takes you an hour to do it...
maniac Posted November 18, 2010 Posted November 18, 2010 The dell ones are a pain as there's actually 3 wires and not two and their power supplies are very finiky due to a controller chip inside them. This is one of the main reasons I'm moving away from Dell as my main laptop supplier as a lot of my power packs have failed over the last 2 years due to the chips inside them becoming faulty and the laptops refusing to charge as a result. For the mains leads, how many do you need as I may have some spares lying around you can have as we've replaced so many in the last 2 years it's not funny.
mac_shinobi Posted November 18, 2010 Author Posted November 18, 2010 They were going to be chucked anyway and I was gonna repair a couple just for our use in the IT department as can see what you are all saying ref failing the PAT test Will give it a try if I get any spare time
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now