Jump to content

Recommended Posts

Posted

One of our Sanyo PLC-XE40's has died, I know you have a support number but I'm wondering if it would be easier to post here for a solution. I'm pretty sure it is still under warranty. The projector boots up (lamp replace light is on) then switches back off after about 20 seconds. I've read a few reports here about the thermal switch but if it is under warranty then I'd rather not risk anything as it seems it is a bit of a tricky procedure. I have gave it a good clean as I can though. Serial No. is G7218833

Thanks

Oh also we have tried another bulb to see if this would help but still does the same thing

Posted

Hi There,

 

Unfortunately, we don't have access to that part of the system - the only thing I can really suggest is to contact Support on 0844 855 2201.

 

If you quote the serial number, and advise them that you have already tried another lamp to no avail, they will be able to confirm if it is in warranty or not, and the next steps to get it fixed.

 

Sorry I can't be more help!

Posted
Rang this morning and it just out of warranty. Was told it needs a deap clean, does anyone know of people in the North West area of England that can provide this service?
Posted

It's all good. I took it apart after reading about the thermal switch,did that and now it is running fine. This forum is a lifesaver (and pretty much a big cash saver)

Thanks

Posted

Glad you managed to get it sorted! - You may find though that it could go again if there is a build up of dust inside the unit - if it starts going pretty regularly, it might be worth considering the internal clean of the projector that support advised.

 

Good luck with it!

Posted

I failed to find a cost-effective deep cleaner for our Sanyos (aged 3-5 years )

 

You may find your LA offers a service, I believe KCC's ICT team (EIS) does it. However we're an independent school so that doesn't help us.

 

We're gradually replacing with Casio bulbless now.




  • 43 When would you like EduGeek EDIT 2025 to be held?

    1. 1. Select a time period you can attend


      • I can make it in June\July
      • I can make it in August\Sept
      • Other time period. Comment below
      • Either time

×
×
  • Create New...