timbo343 Posted June 3, 2010 Posted June 3, 2010 I have just installed 2008 on a HP DL380 G6 and before it was on the domain i couldnt even hear it was one, but now on the domain, the fans are constantly running on high. Is this normal? The server isnt doing anything, even when sat at logon, the fans are so load. Thanks Tim
Domino Posted June 3, 2010 Posted June 3, 2010 Did you use the SmartStart disk to do the install? If not, download and install the proliant support pack - we've seen this when the machines not got the full set of correct drivers
markberry Posted June 3, 2010 Posted June 3, 2010 We have some DL380 G5s and they are reasonably quiet (as quiet as you can expect a big server to be) once booted up. The fans really kick in as soon as the server is switched on for about 20 seconds but then quieten down considerably. Is the server in an air conditioned room? Have you checked the HP Systems Management webpage to check system temperature to make sure it is ok?
jamesreedersmith Posted June 3, 2010 Posted June 3, 2010 Does it have dual power supplies - they are very noisy if only one power supply is plugged in but both are installed.
SYNACK Posted June 3, 2010 Posted June 3, 2010 Upgrade the BIOS and any firmware on the server, had this with an older G3 version where the BIOS/Power Managment did not respond to the newer commands from 2008 so spool down the fans so ran at 100% the whole time till an upgrade of the firmware. Also as others have said download the latest PSP from the hp site and use that to install any drivers that it may have missed out on. 1
timbo343 Posted June 3, 2010 Author Posted June 3, 2010 I shall try the newer firmware to see what happens but it is very strange how it only does it once it is part of a domain.
john Posted June 4, 2010 Posted June 4, 2010 Lack of HP software somewhere Tim, I have 3 of them and they are very quiet for little servers (and 2 are in my office!) so I think somethings not quite right.
SYNACK Posted June 4, 2010 Posted June 4, 2010 Had a pm that the firmware upgrade did resolve it in the end.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now