Jump to content

Recommended Posts

Posted (edited)

Just looking for a server so i can get esxi running so print,web,mail can go on to it.

 

Intel S5000VSA dual Xeon processor SAS board (capable of supporting up to 16Gb RAM)

2 x Xeon E5430 (2GHz, 2 x 6Mb cache)

2 x Seagate SAS ST3300656SS drives 300Gb

16GB Kingston RAM

DVD rewriter

 

£2100

 

Will be running server 2008 with ESXI

 

Would this be a good spec server?

Edited by Danlewis3
Posted
It will be web,print and mail.

 

The mail server at present has a 90GB disk and we have 50GB free. So disc space isn't really an issue.

 

Its not space thats the problem.

 

Its disk raid level, speed and hot swapping thats the problem with 2 disks. 5 disks with raid 5 and 1 hotswap will do nicely.

Posted

We have 3 hardware boxes atm

 

Web Server

Print Server

Mail Server

 

I am preposing to buy a server that can run esxi so i can virtualize these 3 servers.

Posted

Right, are they all windows boxes? if so you'll obviously need space for 3x OS + data I really think you're underestimating the amount of disk you'll need. And it'll be a pain to add or rebuild later.

 

EDIT:: sorry, I've just seen you say you're putting 2 146gb disks in too. might it be an idea to see if you can get 4 146gb disks and a decent RAID card - 4 disks in RAID 5 would give you just under 400gb of useable space

 

RAM seems fine though, there's really low overhead using ESXi.

 

Also are you thinking of P2V'ing the exisiting boxes or doing fresh builds? as you'll need new windows licences if they were OEM licenced

Posted
Will be doing fresh builds but as we dont have licences for 2008, we were going to do that all at the same time new server, 2003 enterprise. and 400 cals.
Posted
If there is going to be a Mail server on the ESXi host, use RAID10 for better I/O. Startup cost will be greater but the VM's will run faster under load.
Posted
Do you not have the funds to use a SAN with your server? Maybe buy two servers so you can move the VMs across the two of them. We done that here and it is amazing. Being able to snap shot is great before updates and configuration changes.
Posted (edited)
Do you not have the funds to use a SAN with your server? Maybe buy two servers so you can move the VMs across the two of them. We done that here and it is amazing. Being able to snap shot is great before updates and configuration changes.

 

Its the end of the financial year and fund are tight as they are! getting 4k out the pot was a push. 6months ago out file servers died so we replaced them with ReadyNAS 2100 Business Edition's and a terrabyte of storage on each. Which i have just noticed can support iSCSI SAN :)

 

In the end i went with this spec and it gets delivered on monday;

DL380 G6 2U Rack Server

2 x Intel E5500 series Quad Core Xeon CPU

3 x Hot Plug 300Gb SAS Slim HDD

16Gb RAM

P410i/256Mb RAID Controller

2 x Hot Plug Power Supplies for Redundancy

Dual Gigabit NIC

DVD-RW

3 Year Next Business Day Warranty

£3083.00

 

Then all our licenses for the servers & CALS at around £1400 to update to server 2008.

Edited by Danlewis3
Posted
Well it came on monday. Today i just finished all the servers Migrated our email, webserver, print server, a backup DC and a linux box. All working great. Everyone really should look at virtualizing options as its so easy to set up and get working.
Posted
Well it came on monday. Today i just finished all the servers Migrated our email, webserver, print server, a backup DC and a linux box. All working great. Everyone really should look at virtualizing options as its so easy to set up and get working.

 

if you get the chance do what sjl has said, move the vms to a san/iscsi nas box then get another server put esxi on it then if one box dies you can just start the vm's on the other server aslong as it can see the luns of the san/nas box it is really good and aslong as you can afford the time to notice the server has gone and start them up on the other one you don't need to buy vmotion or other high availablitly stuff.

 

thats how i had it at my last place, here we have the same but under ubuntu and KVM

 

toby

Posted
if you get the chance do what sjl has said, move the vms to a san/iscsi nas box then get another server put esxi on it then if one box dies you can just start the vm's on the other server aslong as it can see the luns of the san/nas box it is really good and aslong as you can afford the time to notice the server has gone and start them up on the other one you don't need to buy vmotion or other high availablitly stuff.

 

thats how i had it at my last place, here we have the same but under ubuntu and KVM

 

toby

 

All ready done :) 1tb san

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...