3.5mm Audio Faceplate

[boogster]

Hi All

 

I am looking for a 3.5mm Audio only faceplate with a non soldering connection so as to be able to just plug in 3.5 extension lead into back of faceplate for speakers.

 

I have had alittle look round but cant see any with this only

 

Does anyone know where to get or custom made

 

I am looking for 14

 

Thanks

[LosOjos]

Can you be a little more specific? What existing connections are available on the speakers? Am I right in understanding you want to be able to connect a 3.5mm cable to the existing inputs on your speakers?

[James2k]

Do you mean you want a face plate.

 

With a 3.5 jack (female)

 

and on the back a lead with the 3.5 jack (male)

 

?

 

Something like this?

 

http://cpc.farnell.com/_/sg207-3/av-wallplate-vga-3-5mm-jack/dp/AV16622

Edited February 2, 2010 by James2k

[Educare_AV]

The cheapest way would be to buy 14 single gang blank face plates, then fit one of these in each.

 

PRO SIGNAL|PSG01698|3.5MM JACK SOCKET, STEREO, BULKHEAD | CPC

 

They are plug and play if you like no soldering required.

 

Only thing to watch out for is the back box you install them into will need to be quite deep.

 

If you need a hand with them give us a shout,

[boogster]

Thanks for the feedback and James2k you were the closest to what I need.

 

I will try to explain a little further...

 

I require a faceplate with 1 x 3.5 jack (female) and on the back a cable with another 3.5 jack (female) that needs to be about 3m in length so I can run this up the trunking and attach to the 2.1 Logitech speakers (inc subwoofer) that has 1 x 3.5m jack (male) output.

 

Thanks again

[Educare_AV]

I understand now, So really as long as you have a female 3.5mm jack on the front of the faceplate and on the rear a 3m cable leading to another female 3.5 jack socket. So it is not really a problem if the cable is soldered on the rear of the faceplate as long as it done for you.

[James2k]

Might be easier to make your own one up...

 

only 3 wires that will need soldering?

 

Either that or get a wall plate with the audio phono connections on with a long lead.

With a 3.5 to phono lead at wall plate side then you can get phono to 3.5 (F) plug adapter for the other end?

 

CPC Part codes

 

Audio Phono AV13833 3m £1.30

Audio Phono to Jack AV13794 2m £1.04

Phono to (F) Jack adapter AV15543 £0.57

 

Soldering back plate Audio Red and Black Plug AV01718 £1.09

Non Soldering Back plate Audio Red and Black Plug AV16335 £12.45

Edited February 5, 2010 by James2k

[dhicks]

I am looking for a 3.5mm Audio only faceplate with a non soldering connection so as to be able to just plug in 3.5 extension lead into back of faceplate for speakers.

 

I had a look at the CablesToGo RapidRun system at BETT:

 

RapidRun®: RapidRun, RapidRun Digital, audio, video, distribution, audio/video cables - Cables To Go

 

--

David Hicks

[boogster]

Many thansk to all for input. I am getting educareavservices to custom make for me

[boogster]

I would just like to thank Phil @ educareav for his help in customing making to my requirements, the service I received was second to none in both communication and the quality of work, packaging etc...I would definatly recommend him and will be using his services for all my custom made requirements in the future