Roland CM-300 Vinyl Cutter (DRIVER NEEDED)

[oalcock]

Hi Guys,

I am desperate for a Driver for our Roland Vinyl Cutter Machine. It runs through LPT1 port so its quite old. Its a CM-300 model.

Does anybody know where I can get drivers from?

Roland Website I have already tried.

Thanks

[kmount]

I went on their site and found it.

 

Link

 

Product Family - Cutters

Product Model - Second one down, CM-300/400/500

[AngryTechnician]

From Roland's Japanese download site:

 

CAMM-1 DRIVER for Windows XP/2000/NT 4.0 Ver. 2.70

[Model] : GX-24, GX-300, CX-12, CX-24, CX-300, CX-400, CX-500, GX-400, GX-500, CM-12, CM-24, CM-300, CM-400, CM-500, PNC-900, PNC-950, PNC-910, PNC-960, PNC-1000, PNC-1000A, PNC-1100, PNC-1600, PNC-1900, PNC-1610, PNC-1910, PNC-1800, PNC-1200, PNC-1850, PMC-1210, PNC-1410, PNC-1860

[OS] : Windows XP, Windows 2000, Windows NT 4.0

 

http://dg4.roland.co.jp/cs/cutting/driver/d029270j.exe

 

Edit: Despite the higher version number, kmount's find (above) is a newer driver.

Edited September 29, 2009 by AngryTechnician

[oalcock]

Thanks for your speedy response!

This is the site I went on before and my Model isn't on there :-(

CM-300

[AngryTechnician]

Are you after XP or Vista/7 drivers? kmount's link does take you to XP drivers for the CM-300, but I don't think Vista/7 drivers exist for that model.

[oalcock]

Hi there,

Yes I agree the links for the two driver links above in previous posts don't work, not that I am not grateful for your kind input.

They are Dell Optiplex 360s running on 32bit XP. The drivers above both make the machine move, but they just pull the vinyl roll through at speed and crunches it up on the floor.

Please help

[chris_uk]

send me a message with your email address and I can send you the ones we use....

 

Chris

[andyrite]

Hi there,

Yes I agree the links for the two driver links above in previous posts don't work, not that I am not grateful for your kind input.

They are Dell Optiplex 360s running on 32bit XP. The drivers above both make the machine move, but they just pull the vinyl roll through at speed and crunches it up on the floor.

Please help

 

I had this probelm. Check the paper sizes in the printer driver. It would something stupid like that.

 

 

Andy

[oalcock]

send me a message with your email address and I can send you the ones we use....

 

Chris

 

Thanks Chris, my e-mail address is [email protected]

[Azum]

Hi there,

Yes I agree the links for the two driver links above in previous posts don't work, not that I am not grateful for your kind input.

They are Dell Optiplex 360s running on 32bit XP. The drivers above both make the machine move, but they just pull the vinyl roll through at speed and crunches it up on the floor.

Please help

 

and I have that problem, but i have mac, it is very easy to find drivers for window, I've downloaded them for my pc and it works. here is the link

 

Where i can find Roland camm-1 cm-300 driver for mac? cutstudio doesn't work ...