Pyroman Posted January 13, 2009 Posted January 13, 2009 The PC keeps getting stuck on the startup splash screen that would usually be the RAM count. If there's nothing plugged in to it other than the power supply, it'll boot straight past it and then do the obvious "no book disk" but as soon as i plug an HDD in it just sits on the advent screen and refuses to boot. Any ideas? i'm stumped.
PeterW Posted January 13, 2009 Posted January 13, 2009 It sounds like the hard drive might be faulty, can you plug it into a different computer to verify?
Pyroman Posted January 13, 2009 Author Posted January 13, 2009 i've tried it with a different hard drive and i managed to install windows on it but then it's started again. i've got the new HDD in and it's still spending 5 mins on the advent spash screen and then saying Disk Boot Error
PeterW Posted January 13, 2009 Posted January 13, 2009 Is it an IDE drive or SATA, ahve you changed the cable also?
DrPerceptron Posted January 13, 2009 Posted January 13, 2009 what about the IDE/SATA channel/port it's plugged into?
Pyroman Posted January 13, 2009 Author Posted January 13, 2009 tried both. it was originally in a SATA port and the replacement is an IDE drive
apoth0r Posted January 13, 2009 Posted January 13, 2009 I had a similar problem and I ran some memory diagnostics and it turned out to be the RAM after being certain it was the hard drive causing it.
PeterW Posted January 13, 2009 Posted January 13, 2009 Maybe try another power supply if you have one handy.
Pyroman Posted January 13, 2009 Author Posted January 13, 2009 Picked up 2 spare HDD's a spare power supply and memtest86 boot disk, i'm going home now. Points will be awarded when i see which bit's dead later =D thanx for the ideas
nsherin Posted January 16, 2009 Posted January 16, 2009 Also check to see if you have any USB storage devices plugged in and powered up on boot up. If so, disconnected them. I've seen this on a few PCs over the years. where they will hang during the RAM count of the POST procedure. Gave me a fright the first time, as I thought I was dealing with a dead hard drive or some other piece of misbehaving hardware!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now