Jump to content

Recommended Posts

Posted

We are having issues saving linked documents in Sims for student profiles, with the error 'documents failed to save'. This has been ongoing for weeks now and back and forth with our MIS support who established that our proxy is blocking this function. This is after deploying all the latest released patches to resolve this. 

 

Their support then shared ip addresses to whitelist and have now added the correct URLs/ ip ranges/ ports to our firewall via RM broadband and the error still exists. Anyone else having the same issue?

 

Could this be anything linked to this update from Sims/ESS 

 

Sims 7 document server changes for Sims summer 2026

https://www.sims-partners.com/News/2026/Summer26/DMS

 

 

 

image.png.051f118668dd10e7b4d01e4ebde5970d.png

Posted

One of our sites reported similar issues yesterday and raise an issue with our support provider.

Not heard what the outcome was have noticed a few issues about it since the Summer release came out back in July which forced linked docs to go to Sims Next Gen storage by default (never mind the fact the onsite doc storage has hardly uploaded content yet making it a real case of pot luck for where a document might be)

Posted

Hi folks, if you are still having this issue I have resolved it this morning. Back when we shifted to User based filtering, RM provided us with a proxy which circumnavigates a lot of the userproxy restrictions, we use it on some of our servers.

This morning I chucked that proxy server address and port into the section of SIMS installed on my PC from the tab Tools > Setup > SIMS Services > Default Proxy Settings > 'Use the following proxy server' and in our case, we use proxy2.rmsafetynet.com:8080 and this will allow all SIMS services like DMS to tunnel through, and as long as you had the correct permissions, once saved, this will change this setting across all workstations on your Domain.

Hope this helps, as trust me, I have been banging away at this issue since Thursday last week with almost zero help from SIMS.

  • Like 2
Posted

It's not directly solvable for us - due to our setup - but I did confirm that I can add documents on our SIMS server (minimal proxy shenanigans), but not on normal proxy machines. So I'm a step closer to finding a solution too. (SIMS haven't been very helpful for us either.)

Posted

Thanks, thats definitely not the list that was shared with us, I guess because they were busy compiling this KB. I will get these whitelisted on our firewall, hopefully will resolve all the issues for us too. 

  • 2 weeks later...
Posted

Well if its any help, tracked it down on our setup as being cause SIMS is giving a 407 error as it can't authenticate through the RM User based filtering (Get the same with Powershell so have to tell it to pick up the browser credentials at times).

If you go transparent or a non userbased filter it likely works which is why the suggestion from RM to point to one of their different proxys likely worked fine

Posted

This seems to stems from the fact sims has moved the docstorage to the cloud as part of the migration to NextGen.

This will not allow sims to update its fileset or at least not allow the client to see it. Even if you have fileset 3401 on the server.

The client will appear to update to 3401 and then seems roll back 3400 and you end up with an install loop.

You cannot save documents.

 

We resolved the situation after a considerable amount of work and little to no help from SIMS support.

I am beginning to wonder what we are paying for! too much reliance on Ai and aswers covering what we had already done.

Add all the exceptions listed in KB0014069  to the firewall.

I added sims as a proxy exception this did not help until I put the proxy into the UI here. Tools > Setup > SIMS Services > Default Proxy Settings > 'Use the following proxy server'

If you haven't already done it, run all the updates  Consolidated workstation patches 2 and 3 and fileset 3402.

Make sure your users restart. You need all 3 Exceptions, Proxy and patches.

 

Posted

Cheers updating that to point to the SWGfL updateproxy has resolved it... strange the support provider hasn't got back to us yet so going to close that call with them

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...