Microsoft NPS/RADIUS with Unifi controller for BYOD access

[iSteve]

Hi all,

 

I am blundering my way through trying to set up NPS / RADIUS with Unifi APs. So far:

• NPS feature installed on Server 2022. Server is registered with AD.
• Basic policy is set up to allow users in certain groups to authenticate.
• Unifi has Captive Portal set up on my BYOD VLAN. A profile has been made, pointing to my NPS server for auth

 

On my Windows 11 client, I can see my BYOD WLAN. The laptop connects, opens a browser but then can't do anything else. A prompt to authenticate does not appear.

 

One thing I am not clear on, is on the NPS server, when adding a RADUIS Client, is do I add the Unifi controller or all APs?

 

Would be very glad for any advice on this from those who might have done it!

[CrootUK]

Radius client will be the subnet the APs are in. 

[iSteve]

11 hours ago, CrootUK said:

Radius client will be the subnet the APs are in. 

I have one test AP added, by IP. You can't add a subnet in this section.

[CrootUK]

4 hours ago, iSteve said:

I have one test AP added, by IP. You can't add a subnet in this section.

You certainly can ipaddress/24 etc..

[iSteve]

D'oh...you can...it's been a long week