Jump to content

Ford Kuga 2018 Software Update Issue

DalekSec

By DalekSec
in General Chat

 Share

Recommended Posts

DalekSec

DalekSec

Posted
Posted

As i'm aware theres a few car savvy people in this forum thought i'd share my current issue!

 

My Ford sync is currently on 2.3 (updated when i got the car Jan 23) i turned auto update on at the time and left it, turns out never checked for updates latest is 3.0, the auto check auto just spins constantly.

 

So i downloaded and followed the USB instructions. Failed due to 30min auto shut offer. So i tried again this morning left it for 2 hours (not with engine running) went to have a look and it's reset itself but not updated....

 

Does the engine need to be running to update it? next plan it to leave the check for update going but im worried about leaving it on the battery for too long

DalekSec

DalekSec

Posted
  • Author
Posted
Yes I realise that - I mean put the 12v battery on a trickle charger so that it doesn't discharge while the update runs.

 

Ah sorry, i don't have any battery chargers bar a booster (one off booster thing) so think thats a no go. Might just go on a long trip at the weekend and hope it does it in the time!

Koldov

Koldov

Posted
Posted (edited)

Don't know if this helps, but:

 

"SYNC updates - SYNC 3 and previous versions of SYNC

 

Wi-Fi (SYNC 3 required)

 

You can drive and use SYNC during the update.

 

Flash drive (SYNC 3 and previous versions of SYNC)

 

Your vehicle must be in park when you initiate the SYNC update installation process. Make sure your vehicle is in a well-ventilated area as your vehicle must remain running until the update is complete. Once the download process starts, you may drive your vehicle. ."

 

https://www.ford.com/support/how-tos/sync/sync-updates/can-i-drive-while-sync-is-updating/#:~:text=Your%20vehicle%20must%20be%20in,you%20may%20drive%20your%20vehicle.

 

IIRC when I did my KIA a couple of years ago I left it running.

Edited by Koldov
  • Thanks 2
Dos_Box

Dos_Box

Posted
Posted
Arg thats annoying, didnt want to annoy people at work with it running and dont fancy my car being stole off my drive! Long drive it is then

 

I've sat in my Mondeo for some quite long periods of time in the past. During lockdown I had to sit in it for quite a while whilst I triggered a DPF regen on it (using Forscan), as I couldn't take it out on a long run.

3s-gtech

3s-gtech

Posted
Posted

Does other online stuff work on it, like traffic info?

Either way, you’re probably into dealer territory to look at it, though their prices for diagnostics are going bloody silly.

Squelch

Squelch

Posted
Posted (edited)

I use cyanlabs syn3 updater to update my focus. https://cyanlabs.net/applications/syn3updater/

It's kind of like Rufus for Sync 3 head units, you can update the system software and/or the maps. Latest version of maps is F12.

 

If you dig around enough you can find out how to only download and update the UK maps rather than all of Europe and then it finishes the updates much quicker.

 

Edited to add clarity.

Edited by Squelch

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


×
×
  • Create New...