Sunderwood Posted July 21, 2008 Posted July 21, 2008 Hi, All our Staff have laptops with wireless capabilities and we have a few wireless points in certain areas i.e board room and staff room etc. I want a way in which staff dont have to put in the wireless key all the time. I have been reading about a radius server but how much work are they to setup? Cheers
imiddleton25 Posted July 21, 2008 Posted July 21, 2008 If you set up connection manually enter the key then click connect automatically they don't have to do anything laptop will connect.
srochford Posted July 21, 2008 Posted July 21, 2008 Setting up IAS (Microsoft's version of Radius) is pretty trivial - it's a while since we did it but it was wizard driven and with no difficult questions :-) You then set a group policy to say that you want the machine to use Radius and the job is done. Well worth doing :-)
plexer Posted July 21, 2008 Posted July 21, 2008 for a complete guide have a look at: Ultimate guide to enterprise Wireless LAN security released! | George Ou | TechRepublic.com Ben
spc-rocket Posted July 21, 2008 Posted July 21, 2008 Hi, All our Staff have laptops with wireless capabilities and we have a few wireless points in certain areas i.e board room and staff room etc. I want a way in which staff dont have to put in the wireless key all the time. I have been reading about a radius server but how much work are they to setup? Cheers Have a look at this guide. http://www.edugeek.net/forums/networks/13961-wireless-802-1x-radius-authentication-using-ias-server.html Ash.
flashsnaps Posted July 21, 2008 Posted July 21, 2008 All our Access points are identically configured, so the Laptops work fine whereever.
ssiruuk2 Posted July 25, 2008 Posted July 25, 2008 Just out of interest why do your staff have to keep putting the key in each time? For an easy fix just make all APs have the same ssid and wpa key? At our school we use PEAP / 802.1x for our wireless network using Cisco access points - no keys to input as they are generated by the IAS server dynamically. Everything rolled out using group policy unlike Pre-shared keys which are a nightmare to manage roaming between access points works also. PSK tends to hang onto an access point even when it goes out of range forcing the user to repair the wireless each time. If you do go to using Radius then I would definately follow a step by step guide as installing the required cert authority can be tricky - The Radius / IAS setup is a doddle in comparison.
Psymon Posted July 25, 2008 Posted July 25, 2008 We authenticate with Machine certs, and log in with user credentials via radius. Radius then assigns staff to a certain VLAN, and we do user credentials via radius for students, and put them in a VLAN that is controlled by a ACL allowing communication to the firewall only, and ports 80/443.
Grommit Posted July 25, 2008 Posted July 25, 2008 Just out of interest why do your staff have to keep putting the key in each time? For an easy fix just make all APs have the same ssid and wpa key? At our school we use PEAP / 802.1x for our wireless network using Cisco access points - no keys to input as they are generated by the IAS server dynamically. Everything rolled out using group policy unlike Pre-shared keys which are a nightmare to manage roaming between access points works also. PSK tends to hang onto an access point even when it goes out of range forcing the user to repair the wireless each time. If you do go to using Radius then I would definately follow a step by step guide as installing the required cert authority can be tricky - The Radius / IAS setup is a doddle in comparison. That depends if the laptops are on the domain... our laptops aren't but once the WEP key has been entered they connect automatically... We don't want laptops to be on the domain...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now