Some help with Meraki networking

[MrMDStreet]

Hi,

 

This is a new one for me and I can't quite wrap my head around it, was wondering if someone on here might be able to help.

 

I am trying to do the following:

 

CCTV NVR > Ethernet VGA Sender > MS220-48FP > MS120-48LP (In a different building) > Ethernet VGA Receiver

 

To display an image on a connected screen. I have been told it is possible using VLANs & Trunking but I am having a bit of a brain blank today.

 

Any help will be greatly appreciated,

[Guest Guest]

What make/model are the sender and receiver? Are they network devices or devices which use cat5 to transmit the signal?

[MrMDStreet]

They appear to be these ones (https://cpc.farnell.com/pro-signal/psg90980/extender-vga-over-cat-5e-6/dp/CS25387?mckv=sJ5xUWUcz_dc|pcrid|426684131165|kword||match||plid||slid||product|CS25387|pgrid|100371159078|ptaid|pla-309736475965|&CMP=KNC-GUK-CPC-SHOPPING&s_kwcid=AL!5616!3!426684131165!!!network}!309736475965!&gclid=CjwKCAiA9bmABhBbEiwASb35VxDM1pzQfjbRLbbV0wDnrIuXytHxQ9pcq_DSZm8uFjr7Hj8cvTuFUhoCkcMQAvD_BwE) They use Cat5 to transmit it seems.

[Davit2005]

Is the unit an extender or a network interface/convertor?

 

If it is just an extender it won't work when connected through a network switch.

Edited January 25, 2021 by Davit2005

[MrMDStreet]

I would assume it is a converter as it outputs from the NVR via VGA to the sender with an Ethernet out. This ran to a screen with Ethernet in to VGA out.

[Davit2005]

I would assume it is a converter as it outputs from the NVR via VGA to the sender with an Ethernet out. This ran to a screen with Ethernet in to VGA out.

 

By convertor I meant that it would convert the signal to protocol standards so it would flow though a switch. If it is just converting an input from VGA to RJ45 that is different.

[MrMDStreet]

Then it would be that.

 

Would it be safe to assume this is not going to work then?