Help Setting up DHCP scope

[Jcx500]

Ok gotcha, thanks. I know im being a pain and really appreciate the help, ive got my Virtual machine PC and its not picking an ip up from the dhcp. Im almost positive ive setup the virtual switch correctly. Also is this normal?

 

[ATTACH=CONFIG]59851[/ATTACH] [ATTACH=CONFIG]59852[/ATTACH]

 

Is it on the same host?

[Techuser2456]

Is it on the same host?

 

Yes the vitual machine is running on the server.

[Jcx500]

Make sure the switch is set to internal or external

[Techuser2456]

Currently on external, will try internal now.

[Techuser2456]

switched to internal and it booted me from my lab. Currently reconecting

[Techuser2456]

seems to have kept the switch on internal after reboot but now on the server its added another address.

[Techuser2456]

looks like DHCP authorisation failed aswell

[Davit2005]

Have you got the lab Server with DHCP/DNS running on a VM on Hyper-V? Sorry if you have mentioned this before and I have missed it.

[Techuser2456]

Im trying to

[Davit2005]

Im trying to

 

I must admit that I have not used Hyper-V that much, only tried it a few times at home but never stuck with it. I've managed and administered VMWare at quite a few previous orgs but no longer do the server stuff as a day job. Although my home lab (, well actually a over complex home network) keeps me busy and up to speed with some of the server side of stuff and networking.

Edited November 19, 2020 by Davit2005