mdrabble Posted May 22, 2019 Posted May 22, 2019 Looks to install a new physical Remote Desktop server running Server 2019 - not keen on running as a VM due to resources and in case I need to reboot any part of the Hyper-V cluster remotely. What sort of server spec would people go for. Cheers
k-strider Posted May 22, 2019 Posted May 22, 2019 (edited) i guess it depends on what you use it for!! - ours are mostly used for remote access ie from home.. not for classroooms of thin clients. they are getting a bit old now but are fine for the remote access there normaly isnt more than a handfull on at once and we have two in the farm.. But i would go with Lots of ram - and as many cores as you can afford - use SSDs maybe even stripe the SSDs.. if you can have 2 in the farm it helps with patching etc... Edited May 22, 2019 by k-strider 1
mdrabble Posted May 23, 2019 Author Posted May 23, 2019 Usage is just everyday Office stuff with the off bit of internet stuff. Staff mainly use it from home or if they have their BYOD devices in school. The last time I looked we had approx 30 staff using it! Yep, was thinking SSD. I seem to remember someone a link to a site where you you could buy 1 server and get a 2nd free but for the life of me I cannot remember the site! Can HP Proliant DL380p servers take normal SSD drives?
TIOAOA Posted May 23, 2019 Posted May 23, 2019 @mdrabbleThis one ? http://www.serversource.co.uk I'd bet Dave @ICTDirect_Dave can beat it though 2
ICTDirect_Dave Posted May 23, 2019 Posted May 23, 2019 @mdrabbleThis one ? http://www.serversource.co.uk I'd bet Dave @ICTDirect_Dave can beat it though We'll do our best! @mdrabble drop me a line and I'll put some stuff together based on what you're after 1
mdrabble Posted May 23, 2019 Author Posted May 23, 2019 Funnily enough i was about to PM you @ICTDirect_Dave :-D
k-strider Posted May 23, 2019 Posted May 23, 2019 i have two phisical hosts... and a virtulized Gateway + licensing + Brooker... it seems to work fine...
Oaktech Posted May 23, 2019 Posted May 23, 2019 We have a max indicated usage of about 15 at a time. We currently use a single virtual machine as session host, with 8 cores and 16gb ram plus a second gateway/broker with 2 cores and 4gb ram. I've had no complaints about performance. As we're about to absorb another school into our network, I'm going to be either adding a second session host to the farm or I'm going to repurpose their domain server to combine all roles - that has 2x 12 cores ,32gb ram and 8TB of 10k sas. Depends if I get all the data off over the summer or if I have to redirect some of it until the following half term.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now