Jump to content

Recommended Posts

Posted

We use the Sahara Wall Mounted Active Speakers (around £59). Good volume, good sound (not tinny) and very simple and fairly solid. They have one dial/button, you press it to turn it on/off and rotate it to change the volume. It also comes with a remote control as well.

 

Simple but effective.

  • Thanks 1
Posted
Sahara or clever audio, pretty much the same item, they can play up if you never switch them off though!

 

Exactly the same item I believe.

Posted
We use the Sahara Wall Mounted Active Speakers (around £59). Good volume, good sound (not tinny) and very simple and fairly solid. They have one dial/button, you press it to turn it on/off and rotate it to change the volume. It also comes with a remote control as well.

 

Simple but effective.

 

SAME, they come with the wall brackets as well, the new models have an infrared remote. They're loud and clear (not boomy) they were a godsend when we were still using mono vhs tapes from the 90's I pay £59 plus VAT from Hugh Symmons.

Posted
ah yes, looks like you're using something like this speaker wise https://www.canford.co.uk/Products/76-1811_APART-SDQ5PIR-BL-LOUDSPEAKER-SET-Active-30-30W-bal-euroblock-3.5mm-in-RJ45-IR-remote-black

 

More expensive, but the wall option removes the need for remotes (which always get lost) or teachers standing on chairs to change the volume. Will look into it, thanks

 

ah yes, a little cheaper here: https://cpc.farnell.com/apart/sdq5pir-w/stereo-speaker-set-inc-ir-rs232/dp/LS05031

 

Nice and simple install and easy inputs for teachers. And yes, no need to lose the remote (IT can keep it for emergencies!)

Posted

 

More expensive, but the wall option removes the need for remotes (which always get lost) or teachers standing on chairs to change the volume. Will look into it, thanks

 

We've gotten around this issue by putting the speakers sound through the projector, so the teacher can adjust the volume through the projector remote (less likely to get lost) We just leave the speakers always on with a set volume.

Posted
We've recently started using EV EVID-S5.2 in our smaller spaces, might be a good shout for anyone looking for high quality audio (music department etc).
Posted
We've gotten around this issue by putting the speakers sound through the projector, so the teacher can adjust the volume through the projector remote (less likely to get lost) We just leave the speakers always on with a set volume.

 

That works too - Issue we have with some of the powered speakers is after a power failure (Power cut etc) the active speakers sit at like.. 10% volume so if they've lost the remote we have to go and adjust them

Posted (edited)
[ATTACH=CONFIG]52510[/ATTACH]

Not something like this? (stolen from reddit)

 

this is my new wallpaper.

 

EDIT: The ZIP TIES! are holding the projector to the bracket!

Edited by chazzy2501
Posted
this is my new wallpaper.

 

EDIT: The ZIP TIES! are holding the projector to the bracket!

 

Slightly OT but last September my local academy had an open evening for this years year 7 so the wife, daughter and myself went along to have a look and every projector was held on by zip ties.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...