new-2-this Posted April 29, 2008 Posted April 29, 2008 Anyone know why a P4 30.ghz would be running at 85 degrees idle? Having applied new compound as the old stuff was no existant. Its still running hot though. The temps are taken from bios on a foxconn board btw. Its running the stock intel cooler. Any suggestions or would it just be worth getting a better heatsink fan combo?
kmount Posted April 29, 2008 Posted April 29, 2008 I'd guess either poor airflow, or poor quality thermal compound or badly seated heatsink/fan. This is assuming the 85 is celcius and not fahrenheit of course.
Michael Posted April 29, 2008 Posted April 29, 2008 As kmount has already mentioned, check whether the temperature is 85F or 85C, there is a big difference! If the computer is stable, then the other possibility is the board is reporting the temperature wrong. If that's the case you have two options. Either upgrade the BIOS and see if the problem improves, or disable temperature monitoring in the BIOS (not recommended).
new-2-this Posted April 29, 2008 Author Posted April 29, 2008 I used the compound yesterday and it seemed to work fine. Yes it is celcius, had to check though!
ChrisH Posted April 29, 2008 Posted April 29, 2008 Are you sure the temp is correct? Do you have anyother way of testing ti?
PeterW Posted April 29, 2008 Posted April 29, 2008 What happens if you put it under load? if the temp gets any higher it will start to throttle.
fmathieson Posted April 29, 2008 Posted April 29, 2008 Is Intel SpeedStep technology enabled in the BIOS? Look for Intel Speedstep or EIST or Enhanced EIST in the BIOS and make sure it's enabled. It is functionally identical to AMD's PowerNOW! technology in that it lowers the CPU's clock when it's not too busy. If it is disabled, your CPU will be running at 3GHz even when idle instead of 2.4GHz (which I believe is the idle speed of a 3GHz P4) Frank.
Sirbendy Posted April 30, 2008 Posted April 30, 2008 Even so..my first port of attack would be to borrow a thermometer from somewhere and independently verify the temps..MB temp chips I always take with a pinch of salt. I think I'm right in saying P4's throttle in an overheat condition..is it running slow? I know when I've pinged the fan off our Dell SFF P4s they tend to grind after a bit until I refit it.. I've got a p4/3Ghz running stock on an ASUS, running our CCTV and a VM..constantly thrashing 24/7..it's quite toasty in the case, but as it's running fine I don't worry.
flyinghaggis Posted April 30, 2008 Posted April 30, 2008 Anyone know why a P4 30.ghz would be running at 85 degrees idle? Are you sure it'd definitely a P4 3Ghz chip and not a slower model that's been overclocked! Is the fan running at the correct speeds?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now