Jump to content

Recommended Posts

Posted

I will be interested to hear if anyone has a solution to this

 

Our canteen staff have complained that they can't hear their phone ringing in their office

 

The only solution I have come up with is to move the phone into the food preparation area. The issue now is that they can hear it ringing but can't always hear the person speaking because the machinery they are using to so load

Posted

This is where VOIP had a few flaws over traditional analogue systems.

 

Years ago you would have multiple handsets plugged in and even call bells but now its one phone tagged for various numbers. Not sure what system you have but could it be an option to use an ATA and have a group ring that rings this with an external bell attached to it and leave the phone where it is?

Posted
plug a speaker into the external headset socket?

 

I was looking around for something like this, I don't know the pinout of the headset rj11 socket - might have a dig about

Posted

That's what I plan to find out, I think it's just a case of pressing the headset button on the handset

 

If I'd actually got my way and did the phone system in house, I would've just hacked up a cheap 2nd hand voip phone with a audio jack tapped into the speaker wires

Posted

+1 for Algo, I have 3 of them. When the phone rings I can hear it all the way down the hall.

It does need registered to the phone system as a sip device. My system an IPECS has something called personal groups, so I add the Algo's extension to a personal group with the phone. Then it rings with the phone when it is dialed.

Posted
Another idea, if the system has the capability - use a soft phone on a PC and include that in a hunt group with simultaneous ring and put some large speakers on that PC
Posted

Little cable works, however the speakers I have connected to it aren't much louder than the sound coming from the phone.... - I may need a headphone amplifier

 

I can set where the ring comes from in the phone menu (Audible ringer - set to headset) On Polycom at least

  • 1 year later...
Posted
@fiza we didn't do anything in the end - I've a sneaky feeling they we're just ignoring the phone....

 

The algo definitely works. Doesn’t need to be registered to SIP provider. I can send you my setup if you are still considering.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...