Jump to content

Recommended Posts

Posted

The key thing when choosing PoE is to check 2 things:

 

1. PoE standard needed for the phones to run

2. The power draw of the devices

 

Difficult to recommend a switch without knowing these.

Posted

Just to clarify my post a bit further and add to @localzuk valid points

 

Across the campus have on average 4x Ruckus R700 11AC APs and about 8-13 Mitel 5320e phones and some Mitel 5360 - the former uses about 6watt idle / 7 typical , the 5360 uses about 8watt typical

 

The Ruckus R700 uses 13w peak

 

Our typical switch has about 192w power but some have 348w available - same model just different SKU

Posted

I'd try and stick to whatever brand you currently have deployed in your environment for consistency. I hate Netgear. Their config is terrible.

 

Personally? I like the HP 2530 or HP 2920 series (they go up to 48 ports with or without PoE+)

Posted

The problem with HP2530 is that they've doubled in price over the last 3 years. Originally they were not exactly cheap, but now I need a couple more and I literally can't afford to buy them!!!

 

If starting from scratch, I would go Ubiquiti. Such amazingly good value. Infact I may end up starting to go that way anyway, as I want to run some fibre runs at 10gig and the cost to get HP kit running at 10gig is nasty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...