Nail my print quality problem from the picture...

[jwc_007]

Hi

 

Would any one hazard a guess as to what the problem is with the print quality on our Kyocera M6026cdn?

Somewhat random white areas which are not improved after doing the following:

 

Changing toners (genuine kyocera)

Developer clean cycle

Drum clean cycle

Laser clean cycle

Colour Calibration cycle

 

 

Many thanks

[localzuk]

Looks like a faulty fuser to me.

[SHimmer45]

+1 on the fuser or the developer unit isnt working properly

[jwc_007]

Cheers chaps. The fuser is a consumable part which is available and east to swap out. I'll give it a go and report back.

[round2it]

fuser or transfer belt

[PotNoodleTech]

Fuser. But be warned they are not cheap. I'd consider replacing the entire printer. Edited July 13, 2016 by PotNoodleTech

[SHimmer45]

might be the heater roller which i expect you can buy on its own (changed a few on older FS2000 & FS3920's) works out about £40.00 for the roller.