Jump to content

Recommended Posts

Posted

Hello ladies and gents.

 

I've tried everything I can think of, which isn't very much, but I can't seem to get these to work properly.

IMG_20141002_133523.jpg

 

This Iiyama screen is being used as a secondary monitor via VGA, which is great - The main monitor is connected via DVI

IMG_20141002_133505.jpg

Whenever I start up the PC this is connected to with the big monitor plugged in, I get signal on the main monitor but no display, just a black screen and nothing on the monitor. This is resolved by booting up the PC without the VGA in, then plugging it in after it has booted, but that's not exactly a practical solution.

 

I've checked the BIOS, played with the extend/duplicate setting, set the desk monitor as the main display - I've tried everything I can think of but can't get it to boot properly when this thing is connected.

 

Anyone have any ideas?

 

Cheers,

Tom

Posted
Sounds to me like a bios setting choosing the default video connection. I recommend looking for a BIOS update, if that fails then look for a cheap graphics card as 2 connections on the same motherboard appears to be problematic.
Posted
Sounds to me like a bios setting choosing the default video connection. I recommend looking for a BIOS update, if that fails then look for a cheap graphics card as 2 connections on the same motherboard appears to be problematic.

 

I'll try. Thanks :)

Posted

What happens if you set BOTH monitors to a lowish res - say 1024*768? (ok it'll look horrible but this is for a test)

 

Ive had some weird problems when my teachers turn some of our old Epson 4*3 projectors on before the computer boots - the vga connected projector picks up the widescreen 1440*900 graphics settings on the other (dvi) video port! Im wondering if in your case the big screen is pushing the res out of tolerance for the main monitor.

Posted
Right, I've since discovered that turning the large monitor on before the PC allows it to boot properly and everyone's happy. If you do it the other way around, however, the display is sent to the board, but Windows doesn't boot - it just sits with a black screen and flashing underscore in the top left. Odd.
Posted

Any USB connection?

 

Some of our old computers tried to boot off their smartboards and stopped with a cursor flashing :D

 

Changing to boot order so it booted off the hard drive first or disabling boot to other device fixed that problem here.

Posted (edited)
Any USB connection?

 

You genius. That's solved it. For some reason, it decided to boot to USB, but I've disabled all the USB options and it's all good. Cheers mate :D

Edited by TomDrummer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...