Jump to content

Recommended Posts

Posted

Hi guys,

 

Have one machine here which all i can think of, is disconnecting from the network momentarily. We have roaming profiles here, with shared desktops. She will be working on her machine, when all of a sudden all her desktop icons will disapear. Its like the connection to our server has gone and re connected - but without adding the icons back on the desktop. She has to manually log off and on for them to re-appear.

 

The machine has been re-imaged and the problem seems to still happen. Any ideas?

 

Cheers

Posted

We have had occasional problems like this in the past.

 

Deactivating any power management on the ethernet port normally fixes it

 

(Another good one is the rear mounted usb ports deactivating and stopping the keyboard & mouse working mid lesson!)

 

Another possibility is a damaged ethernet cable or the wiring inside the socket leading to an intermittent connection

  • Thanks 1
Posted

Cheers guys will swap the leads over and see if it makes a difference.

 

This is what I found in event viewer:

This computer was not able to set up a secure session with a domain controller in domain DOMAINNAME due to the following:

There are currently no logon servers available to service the logon request.

This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator.

 

and

 

NtpClient was unable to set a domain peer to use as a time source because of discovery error. NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: The entry is not found. (0x800706E1)

 

not sure if thats anything to do with it.

Posted
Oh & whilst I remember - twice over the years Ive had to replace a cable in the cabinet that had gone bad for some reason when nothing else fixed a problem
Posted (edited)

Are you sure no little fingers are playing with cables in the class room without being noticed.

 

How many times I've gone out to fix things and it just so happens there is a student sitting within easy reach of a VGA or mouse cable :redface:

 

Alternatively, I have also seen some strange issues with switching and cables before now.

Edited by Davit2005
Posted
Are you sure no little fingers are playing with cables in the class room without being noticed.

 

 

Hmm a common one is to unclip the ethernet cable at the wall and pull it back a couple of mm. Then you get a nice intermittent connection.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...